Nortel Networks WAG54G manual Advanced Routing Tab

Page 31

Wireless-G ADSL Gateway

The Advanced Routing Tab

The Advanced Routing screen allows you to configure NAT (Network Address Translation), dynamic routing, static routing, and PVC routing settings.

Advanced Routing

Operating Mode. In this section, you can disable or enable the Network Address Translation (NAT) feature.

NAT. NAT is a security feature that is enabled by default. It enables the Gateway to translate IP addresses of your LAN to a different IP address for the Internet. To disable NAT, click the Disable button.

Dynamic Routing. If you have one or more other gateways or routers on your network, you may need to enable dynamic routing, static routing, or both. In dynamic routing, the Gateway learns routes to other networks by periodically communicating with other gateways and routers using RIP, the Routing Information Protocol. Dynamic routing lets the Gateway automatically adjust to changes in the network’s layout.

RIP. If you have multiple routers, you may want to use RIP so the routers can exchange routing information with each other. To use RIP, select the Enabled radio button. Otherwise, keep the default, Disabled.

Transmit RIP Version. To transmit RIP messages, select the protocol you want: RIP1, RIP1-Compatible (RIP1 broadcasts and RIP2 multicasts), or RIP2. If you don’t want to transmit RIP messages, select Disable.

Receive RIP Version. To receive RIP messages, select the protocol you want: RIP1 or RIP2. If you don’t want to receive RIP messages, select Disable.

Static Routing. For static routing, you input fixed routes to other networks by hand. This can be done to ensure that information travels by the most efficient path, or to avoid the overhead of RIP. To create a static route, change the following settings:

Select set number. Select the number of the static route from the drop-down menu. The Gateway supports up to 20 static route entries. If you need to delete a route, then select the entry and click the Delete This Entry button.

Destination IP Address. The Destination IP Address is the IP address of the remote network or host that will be reached through the static route. Note that a network address almost always ends in 0, and a host address never ends in 0.

Subnet Mask. Enter the Subnet Mask (also known as the Network Mask), which determines which portion of an IP address is the network portion, and which portion is the host portion.

Chapter 5: Configuring the Wireless-G ADSL Gateway

Figure 5-14: Advanced Routing

24

The Setup Tab

Image 31
Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use this GuideWord definition Table of Contents Wireless-G Adsl Gateway Network Ports and Reset Button on Side Panel24 Advanced Wireless Settings Figure C-2 MAC Address/Adapter Address Welcome IntroductionWhat’s in this User Guide? Wireless-G Adsl Gateway What’s an IP Address? Planning Your NetworkGateway’s Functions IP AddressesDhcp Dynamic Host Configuration Protocol Servers What is a VPN?Dynamic IP Addresses VPN Gateway to VPN Gateway Why do I need a VPN?Wireless-G Adsl Gateway Ports and Reset Button on Side Panel Getting to Know the Wireless-G Adsl GatewayPower LEDs and Power Button on Side PanelBottom Panel with Stand Closed Position Bottom PanelOverview Connecting the Wireless-G Adsl GatewayConnect the Adsl Line Wired Connection to a ComputerWireless Connection to a Computer Security Configuring the Wireless-G Adsl GatewaySetup WirelessStatus Access RestrictionAdministration Applications & GamingInternet Setup How to Access the Web-based UtilitySetup Tab Basic Setup TabStatic IP RFC 1483 Bridged Dynamic IPRFC 1483 Routed RFC 1483 RoutedRFC 2516 PPPoE IPoARFC 2364 PPPoA Bridged Mode OnlyNetwork Setup Optional Settings required by some ISPsConfiguring the Wireless-G Adsl Gateway Setup Tab DynDNS.org Ddns TabTZO.com Advanced Routing Advanced Routing Tab15 Routing Table Wireless Network Wireless TabBasic Wireless Settings Tab Wireless Security TabWPA Radius WPA Pre-Shared KeyWireless Network Access Wireless Access TabWireless Client MAC List screen Advanced Wireless Advanced Wireless Settings TabAdditional Filters Security TabFirewall Tab FirewallVPN Passthrough VPN TabIPSec VPN Tunnel 28 VPN Settings Summary 29 Advanced IPSec Settings Internet Access Tab Access Restriction Tab33 List of PCs Single Port Forwarding Tab Applications & Gaming TabSingle Port Forwarding Port Triggering Tab Port Range Forwarding TabPVC QoS Priority DMZ TabQoS Tab QoS40 Edit List of QoS Settings Edit list of QoS SettingsGateway Access Administration TabManagement Tab UPnP SnmpIGMP-Snooping IGMP-ProxyTelnet Reporting Reporting TabEmail Alerts Restore Configuration Diagnostics TabBackup&Restore Tab Backup ConfigurationUpgrade from LAN Factory Defaults TabFirmware Upgrade Tab Reboot TabInternet Connection Status TabGateway Tab Gateway Information51 Local Network Local Network Tab54 Wireless DSL Status DSL Connection TabPVC Connection Common Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a computer Want to test my Internet connection Wireless-G Adsl Gateway Wireless-G Adsl Gateway TCP UDP Can’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Gateway to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Power LED is flashingPower LED flashes continuously Does the Gateway support IPX or AppleTalk? Frequently Asked QuestionsWhere is the Gateway installed on the network? Is IPSec Passthrough supported by the Gateway?Does the Gateway support ICQ send file? What is Network Address Translation and what is it used for?What is DMZ Hosting? How many ports can be simultaneously forwarded? What are the advanced features of the Gateway?What is the Ieee 802.11g standard? Is the Gateway cross-platform compatible?What is roaming? What Ieee 802.11b and 802.11g features are supported?What is ad-hoc mode? What is infrastructure mode?What is WEP? What is the ISM band?What is Spread Spectrum? What is DSSS? What is FHSS? And what are their differences?How do I resolve issues with signal loss? How do I reset the Gateway?Have excellent signal strength, but I cannot see my network Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Adsl Gateway Windows 98 or Me Instructions Figure C-1 IP Configuration ScreenFigure C-3 MAC Address/Physical Address Windows 2000 or XP InstructionsAppendix D Upgrading Firmware Figure D-1 Firmware UpgradeAppendix E Glossary Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix F Specifications Storage Humidity Appendix G Regulatory Information Dual-Band Wireless Access Point Dual-Band Wireless Access Point Wireless-G Adsl Gateway Wireless-G Adsl Gateway Location Frequency Range MHz Power Eirp Applicable Power Levels in FranceOpen the Wireless Network Connection window Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix H Warranty Information Europe Mail Address Appendix I Contact InformationOutside of Europe Mail Address

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.