Nortel Networks VT100 Setting up the vt100.ctl file, Trs.conf file for accounting application

3-8Getting started

You want to set up the VT100 Gateway to initialize the sessions as follows:

•initialize sessions 2-3 for accounting with acctinit.act,

•initialize sessions 4-8 for market with login.act,

•initialize sessions 9-10 for banking with login.act, and

•initialize sessions 15-17 for airline with signin.act

Figure 3-5 illustrates how you should set up trs.conf to implement the configuration for only the accounting application.

Figure 3-5

trs.conf file for accounting application

#trs.conf file to set up sessions for the IVR Generator application processor accounting:0>2-3:acctinit:ping@60:vt100

The trs.conf file as shown in Figure 3-5 relates to the initial-action template shown in Figure 3-9.

Setting up the vt100.ctl file

The vt100.ctl file must be created and stored in the /u/ivr/vt100 directory before you can use the VT100 Gateway. The vt100.ctl file configures the terminal type for each session and corresponds to the sessions defined in the trs.conf file.

Each line in the vt100.ctl file uses the syntax shown in Figure 3-6.

555-9001-316 Standard 1.0 February 1996