Nortel Networks 2500, 2600, 1600, 4000, 4500 manual Removing the Contivity 4600 front bezel

20Chapter 1 Contivity 4600 Option Installation

Figure 1 shows you how to remove the front bezel from the Contivity 4600. You do not need to turn off the switch to remove the front bezel when installing a power supply or hard disk drive.

Figure 1 Removing the Contivity 4600 front bezel

Using a phillips screwdriver, rotate screws a quarter turn anti-clockwise (top right and left corners), then separate ball stud on bezel from socket on chassis (middle of both sides and bottom right and left corners)

Boot/R

Alert/Faeialdy

Contivity

4600

CS460005A

302283-E Rev 00