Nortel Networks 2600, 1600, 2500, 4500 manual Replacing a Contivity 4000 disk drive

52Chapter 3 Contivity 2500/2000/4000 Option Installation

Replacing a Contivity 4000 disk drive

To replace a Contivity 4000 disk drive, you must do the following:

Software

First save any data that has not yet been saved to the hard disk from the disk cache:

1Use your Web browser to navigate to the switch, and go to the Admin!File System display.

2Click the button “Prepare selected device for removal.”

Hardware

Remove the switch’s front bezel as shown in Figure 15; then follow these steps:

1To remove a Contivity 4000 hard disk drive, insert and turn the hard disk drive key to the right as shown in Figure 22. The LED becomes a “U” for unlocked.

NOTE: Turning the key shuts off the power to the hard disk drive.

302283-E Rev 00