Nortel Networks 1600 Replacing a Contivity 4600 power supply, Installing Contivity 4600 DIMMs

Chapter 1 Contivity 4600 Option Installation 25

Figure 5 Installing Contivity 4600 DIMMs

Alignment

Keys

2 1

3 2 4

Locking lever

CS460009A

7Pull up the locking levers on both sides of the next available DIMM, and snap the DIMM into its socket.

8Replace the support bracket by tightening the two secured captive screws and the rear Phillips screw.

9Push in the slide-out tray and tighten the thumb-screws.

Replacing a Contivity 4600 power supply

To remove the power supply:

1Remove the front bezel as shown in Figure 1.

2Use a flat-head screwdriver to unscrew the top and bottom power supply screws, as shown in Figure 6.

Installing Hardware Options for the Contivity VPN Switch