44Chapter 3 Contivity 2500/2000/4000 Option Installation
Figure 15 Removing the Contivity 2500/2000/4000 front bezel
Slide fingers behind front bezel and firmly pull forward in the direction of arrows.
Front Bezel
The first few times you remove the front bezel it will be rather difficult to remove. This is because the ball stud and sockets are new. After a few times, removal is easier. Sliding the top cover back is optional; it allows you to get a better grip on the front bezel for removal.
Remove the switch’s front bezel as follows:
1.Optionally, remove the three screws at the top rear of the chassis, then slide the top cover back.
2.Slide your fingers between the front bezel and the switch.
3.Pull forward firmly.