Installation Installation Considerations

INSTALLATION

INSTALLATION CONSIDERATIONS

The following is a list of tools needed for installation:

Volt/Ohm Meter Wire strippers Wire crimpers Wire cutters

#2 Phillips screwdriver Battery post wrench

Hand held drill w/assorted bits 1/8" diameter heatshrink tubing Assorted connectors

Adequate Length—Red Power Wire Adequate Length—Remote Turn-on Wire Adequate Length—Black Grounding Wire

This section focuses on some of the vehicle considerations for installing your new amplifier. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

!CAUTION: If you feel unsure about installing this system yourself, have it installed by a qualified technician.

!CAUTION: Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

401SP, 301SP specifications

Rockford Fosgate is a name synonymous with high-performance audio equipment, particularly in the automotive sound system market. Among their impressive lineup, the Rockford Fosgate 401SP and 301SP represent excellent choices for car audio enthusiasts looking to enhance their in-car audio experience.

The Rockford Fosgate 401SP is a powerful 4-inch speaker designed to deliver exceptional sound quality. Built with a flex-fit basket design, it enables easy installation in a variety of vehicles, accommodating various mounting locations. One of its standout features is the high-temperature voice coil that can withstand intense heat, ensuring reliability and performance even under demanding conditions. Coupled with a durable polypropylene cone and butyl rubber surround, the 401SP produces clear and balanced audio across a wide frequency range. This speaker is also equipped with a high-efficiency design, allowing it to generate maximum output with minimal power input, making it suitable for systems running on less power.

On the other hand, the Rockford Fosgate 301SP is designed to cater to users seeking a cost-effective yet high-quality audio solution. This 3-inch speaker fits snugly in tighter spaces while still delivering impressive sound performance. Its weather-resistant design makes it ideal for various environments, ensuring that it can withstand elements such as moisture and UV rays. Like its bigger counterpart, the 301SP utilizes a polypropylene cone and rubber surround, ensuring durability and longevity. Additionally, it features a high-performance voice coil that provides efficient power handling, enabling it to reproduce dynamic sounds with clarity.

Both models incorporate Rockford Fosgate’s advanced engineering technologies, including their unique speaker design that enhances sound stage and imaging. Furthermore, the speakers are optimized for use with amplifiers, allowing users to experience deeper bass and crisper highs when integrated into a full audio system. The combination of these features results in an audio experience that stands out for its quality, depth, and clarity.

In conclusion, both the Rockford Fosgate 401SP and 301SP offer unique advantages tailored to different user needs. Whether you prioritize power and depth with the 401SP or seek a compact solution with excellent quality in the 301SP, Rockford Fosgate continues to deliver top-notch audio products that elevate any car's sound system.