Tektronix Phaser 840 setup guide Windows 95 PhaserPort Software, TCP/IP conﬁguration for a PC

Page 37

Chapter

6 Windows 95 and

Windows 98:

PhaserPort Software

TCP/IP conﬁguration for a PC

If you don't already have a TCP/IP address conﬁgured for your PC, contact your system administrator to ensure that the conﬁguration is made according to your company guidelines. If there is no TCP/IP network already in place, conﬁgure your PC with a unique address such as 192.1.1.1. To check the IP address for your PC, follow these steps:

1.From the Start menu, click Run.

2.Enter:

winipcfg

3.Click OK.

4.Choose your network adapter from the pulldown list.

5.The IP address is listed in the IP Address ﬁeld.

For more information on installing and conﬁguring TCP/IP in Windows environments, see your Microsoft Windows documentation.

Setup Guide

31

Image 37

Contents L O R P R I N T E R Page Phaser 840 Color Printer PhaserShare Networking Setup Guide Page Contents PhaserLink Printer Management Software Setting the Printer’s IP Addressing ParametersWindows NT IndexUnix IntroductionPrinting a Conﬁguration Before you begin network conﬁgurationPrinting a Conﬁguration Printer management If you need more information PhaserShare Series B Ethernet interface Connecting Your Printer to a NetworkBuilt-in Ethernet connector Ethernet connections and indicatorsPhaserShare Series B Ethernet card 10BaseT or 100BaseTx Twisted Pair Ethernet cables and termination10Base2 Thin Ethernet 10Base5 Thick EthernetPhaserShare Series B Token Ring card Token Ring connections and indicators Ring speed jumper Token Ring parameters Token Ring conﬁgurationConﬁguring Token Ring parameters Using the conﬁg-TokenRingscriptArp Using PhaserLink software to conﬁgure Token Ring Using the PhaserShare Administrator to conﬁgure Token RingLocalTalk card connections and indicators PhaserShare Series B LocalTalk cardLocalTalk connection Connecting to a single computer LocalTalk connectors, cables, and terminatorsConnecting Your Printer to a Network PhaserShare Networking Conﬁguration overview EtherTalk, LocalTalk TokenTalk ConfigurationFinding the printer’s name in the Chooser Installing the PhaserShare Administrator Novell NetWare ConfigurationInstallation Start the PhaserShare Administrator Using the Quick Conﬁguration WizardLog on to the ﬁle server Select a print serverLaunch the Quick Conﬁguration Wizard Conﬁgure the printer and set up queuesVerify information and ﬁnish the conﬁguration Setting IPX frame types from the front panelAdding the printer to the host table TCP/IP Configuration UnixAssigning a print queue to the printer Required remote printer queue names Assigning print queues with PhaserPrint for UnixUnix model ﬁles Example installation for a typical BSD Unix system Descriptions of printcap parameters Sample printcap ﬁlePrinter conﬁguration Extracting ﬁles from unix.tar Listing the contents of unix.tarExtracting the ﬁles TCP/IP conﬁguration for a PC Windows 95 PhaserPort SoftwarePhaserPort software installation Setting the printer’s IP addressUsing the installer Create your ﬁrst port and install the driver Adding a port for a new printer Installation Completed dialog, click FinishAdding a port to an existing printer Changing a port’s IP address Windows NT Add the printer Click Start, Settings, and PrintersCreating an AppleTalk port Creating an LPR portName the printer and set up sharing Install the driverWindows NT creates the printer Adding a Windows NT 4.0 driver on an NT 3.51 server Select the port where the printer is connectedEnter the printer’s name and set up sharing Adding a Windows NT 3.x driver Creating an LPR port Set up sharing Windows NT PhaserShare Networking Setting the Printer’s IP Addressing Parameters Setting the Printer’s IP Addressing Parameters Setting IP parameters from the front panelSet the network mask Setting IP parameters Rarp or BootpT E Installing the Dhcp server Setting IP parameters DhcpSetting up a Dhcp server Open the Network Administration group Dhcp transactions Supported BOOTP/DHCP ﬁeldsSetting IP parameters PostScript utility ﬁle Unix only Conﬁg-IP ﬁlename Running the conﬁg-IPscriptSetting IP parameters PhaserLink Printer Management Software DNS Setting the Printer’s IP Addressing Parameters Accessing printer information from a browser PhaserLink Printer Management SoftwareConﬁguring PhaserLink Help PhaserLink Printer Management software help ﬁlesAccessing PhaserLink Help Information Forwarding Setting printer parameters PhaserLink software pagesDisabling Information Forwarding Index With config-IP script With config-TokenRingscriptRarp Page Printed on recycled paper