Tektronix Phaser 840 setup guide Creating an LPR port

Page 50

7 Windows NT

Creating an LPR port

1.In the Printer Port dialog box, click the LPR port. If the LPR port is not listed in the Printer Port dialog box, the Microsoft TCP/IP Printing Service needs to be added to the Windows NT machine:

a.In Control Panel, double-clickNetwork; the Network Settings dialog box appears.

b.In Network Settings, click Add Software; the Add Network Software dialog box appears.

c.In the Add Network Software dialog box, click the drop-down menu for Network Software. In the list, select TCP/IP Protocol and Related Components, then click Continue; the TCP/IP Installation dialog box appears.

d.In the TCP/IP Installation dialog box, select TCP/IP Network Printing Support. (Consult your Windows NT documentation for information on other TCP/IP options.)

e.Click Continue to install this service. The original Windows NT distribution diskettes are needed during installation. To apply these changes, restart Windows NT.

2.In the Add LPR compatible printer dialog box, enter your printer’s IP address in the ﬁeld named Name or address of server providing lpd. In the ﬁeld named Name of printer or print queue on that server, enter PS or AUTO in UPPERCASE letters.

44PhaserShare Networking

Image 50

Contents L O R P R I N T E R Page Phaser 840 Color Printer PhaserShare Networking Setup Guide Page Contents Windows NT Setting the Printer’s IP Addressing ParametersPhaserLink Printer Management Software IndexIntroduction UnixPrinting a Conﬁguration Before you begin network conﬁgurationPrinting a Conﬁguration Printer management If you need more information Connecting Your Printer to a Network PhaserShare Series B Ethernet interfaceEthernet connections and indicators Built-in Ethernet connectorPhaserShare Series B Ethernet card 10Base2 Thin Ethernet Ethernet cables and termination10BaseT or 100BaseTx Twisted Pair 10Base5 Thick EthernetPhaserShare Series B Token Ring card Token Ring connections and indicators Ring speed jumper Token Ring conﬁguration Token Ring parametersUsing the conﬁg-TokenRingscript Conﬁguring Token Ring parametersArp Using the PhaserShare Administrator to conﬁgure Token Ring Using PhaserLink software to conﬁgure Token RingLocalTalk connection PhaserShare Series B LocalTalk cardLocalTalk card connections and indicators LocalTalk connectors, cables, and terminators Connecting to a single computerConnecting Your Printer to a Network PhaserShare Networking EtherTalk, LocalTalk TokenTalk Configuration Conﬁguration overviewFinding the printer’s name in the Chooser Installation Novell NetWare ConfigurationInstalling the PhaserShare Administrator Log on to the ﬁle server Using the Quick Conﬁguration WizardStart the PhaserShare Administrator Select a print serverConﬁgure the printer and set up queues Launch the Quick Conﬁguration WizardSetting IPX frame types from the front panel Verify information and ﬁnish the conﬁgurationAssigning a print queue to the printer TCP/IP Configuration UnixAdding the printer to the host table Unix model ﬁles Assigning print queues with PhaserPrint for UnixRequired remote printer queue names Example installation for a typical BSD Unix system Sample printcap ﬁle Descriptions of printcap parametersPrinter conﬁguration Extracting the ﬁles Listing the contents of unix.tarExtracting ﬁles from unix.tar Windows 95 PhaserPort Software TCP/IP conﬁguration for a PCUsing the installer Setting the printer’s IP addressPhaserPort software installation Create your ﬁrst port and install the driver Installation Completed dialog, click Finish Adding a port for a new printerAdding a port to an existing printer Changing a port’s IP address Windows NT Click Start, Settings, and Printers Add the printerCreating an LPR port Creating an AppleTalk portWindows NT creates the printer Install the driverName the printer and set up sharing Select the port where the printer is connected Adding a Windows NT 4.0 driver on an NT 3.51 serverEnter the printer’s name and set up sharing Adding a Windows NT 3.x driver Creating an LPR port Set up sharing Windows NT PhaserShare Networking Setting the Printer’s IP Addressing Parameters Setting IP parameters from the front panel Setting the Printer’s IP Addressing ParametersSetting IP parameters Rarp or Bootp Set the network maskT E Setting up a Dhcp server Setting IP parameters DhcpInstalling the Dhcp server Open the Network Administration group Supported BOOTP/DHCP ﬁelds Dhcp transactionsSetting IP parameters PostScript utility ﬁle Unix only Running the conﬁg-IPscript Conﬁg-IP ﬁlenameSetting IP parameters PhaserLink Printer Management Software DNS Setting the Printer’s IP Addressing Parameters PhaserLink Printer Management Software Accessing printer information from a browserAccessing PhaserLink Help PhaserLink Printer Management software help ﬁlesConﬁguring PhaserLink Help Setting printer parameters PhaserLink software pages Information ForwardingDisabling Information Forwarding With config-IP script With config-TokenRingscript IndexRarp Page Printed on recycled paper