Tektronix Phaser 840 Launch the Quick Configuration Wizard, Configure the printer and set up queues

Novell NetWare Configuration 4

Launch the Quick Configuration Wizard

Click Quick Configuration to launch the Quick Configuration Wizard.

Configure the printer and set up queues

1.If desired, change the Print Server Name or Printer Name.

2.Select connection mode(s) by checking the box(es) for Bindery Services, NDS Services, or both.

3.Click Next; the dialogs that follow allow you to configure Bindery connections, NDS connections, or both. You need to supply the following information for these connections:

Information needed for Bindery connections

Select either the configuration file server or the preferred file server from the drop-down list; click Next.

If the file server you want is not on the list, proceed with these steps:

a.Click File Servers to display the File Servers Browse dialog box.

b.Select the server you want. Click OK. You are returned to the File Server Selection dialog box.

c.Select either the configuration file server or the preferred file server from the drop-down list. Click Next.

Create and select a new queue, or select an existing queue. Click Finish.

Information needed for NDS connections

■Specify the current Directory Services Tree (the tree where the print server will reside).

■Specify the current Directory Services Context (the location in the directory services tree where the print server will reside).

■Create and select a new queue, or select an existing queue. Click Finish.

Setup Guide 23