Tektronix Phaser 840 setup guide Open the Network Administration group

Page 58

8 Setting the Printer’s IP Addressing Parameters

Defining a scope in Windows NT 3.5.x

a.Open the Network Administration group.

b.Double-click DHCP Manager.

c.Double-click Local Machine.

d.Click Scope, Create.

e.Enter the IP information to define the scope.

3.Define the lease. A lease is a pre-determined time that the printer holds the IP address. When the lease time expires, the printer queries the DHCP server again to renew its lease of the IP address. It is recommended that you set the lease to Unlimited.

4.Define a name for the scope. You are prompted to activate the newly created scope; answer Yes.

5.Restart the DHCP server:

a.In Control Panel:Services, scroll to DHCP Server.

b.Click Stop; click Start.

c.Click Close.

6.Turn on the printer. The printer receives its IP address from the server. Print a Configuration Page to obtain the IP address (“Printing a Configuration Page” on page 2).

7.Using Add Printer Wizard (Windows NT 4.0) or Print Manager (Windows NT 3.5x), verify that a Windows NT printer port refers to the printer’s IP address or DNS name. See Chapter 7, “Windows NT” for more information.

8.Configure the printer’s DHCP client software.

52PhaserShare Networking

Page 57 Page 59
Image 58
Page 57 Page 59
Contents L O R P R I N T E R Page Phaser 840 Color Printer PhaserShare Networking Setup Guide Page Contents Windows NT Setting the Printer’s IP Addressing ParametersPhaserLink Printer Management Software IndexIntroduction UnixPrinting a Configuration Before you begin network configurationPrinting a Configuration Printer management If you need more information Connecting Your Printer to a Network PhaserShare Series B Ethernet interfaceEthernet connections and indicators Built-in Ethernet connectorPhaserShare Series B Ethernet card 10Base2 Thin Ethernet Ethernet cables and termination10BaseT or 100BaseTx Twisted Pair 10Base5 Thick EthernetPhaserShare Series B Token Ring card Token Ring connections and indicators Ring speed jumper Token Ring configuration Token Ring parametersUsing the config-TokenRingscript Configuring Token Ring parametersArp Using the PhaserShare Administrator to configure Token Ring Using PhaserLink software to configure Token RingLocalTalk card connections and indicators PhaserShare Series B LocalTalk cardLocalTalk connection LocalTalk connectors, cables, and terminators Connecting to a single computerConnecting Your Printer to a Network PhaserShare Networking EtherTalk, LocalTalk TokenTalk Configuration Configuration overviewFinding the printer’s name in the Chooser Installing the PhaserShare Administrator Novell NetWare ConfigurationInstallation Log on to the file server Using the Quick Configuration WizardStart the PhaserShare Administrator Select a print serverConfigure the printer and set up queues Launch the Quick Configuration WizardSetting IPX frame types from the front panel Verify information and finish the configurationAdding the printer to the host table TCP/IP Configuration UnixAssigning a print queue to the printer Required remote printer queue names Assigning print queues with PhaserPrint for UnixUnix model files Example installation for a typical BSD Unix system Sample printcap file Descriptions of printcap parametersPrinter configuration Extracting files from unix.tar Listing the contents of unix.tarExtracting the files Windows 95 PhaserPort Software TCP/IP configuration for a PCPhaserPort software installation Setting the printer’s IP addressUsing the installer Create your first port and install the driver Installation Completed dialog, click Finish Adding a port for a new printerAdding a port to an existing printer Changing a port’s IP address Windows NT Click Start, Settings, and Printers Add the printerCreating an LPR port Creating an AppleTalk portName the printer and set up sharing Install the driverWindows NT creates the printer Select the port where the printer is connected Adding a Windows NT 4.0 driver on an NT 3.51 serverEnter the printer’s name and set up sharing Adding a Windows NT 3.x driver Creating an LPR port Set up sharing Windows NT PhaserShare Networking Setting the Printer’s IP Addressing Parameters Setting IP parameters from the front panel Setting the Printer’s IP Addressing ParametersSetting IP parameters Rarp or Bootp Set the network maskT E Installing the Dhcp server Setting IP parameters DhcpSetting up a Dhcp server Open the Network Administration group Supported BOOTP/DHCP fields Dhcp transactionsSetting IP parameters PostScript utility file Unix only Running the config-IPscript Config-IP filenameSetting IP parameters PhaserLink Printer Management Software DNS Setting the Printer’s IP Addressing Parameters PhaserLink Printer Management Software Accessing printer information from a browserConfiguring PhaserLink Help PhaserLink Printer Management software help filesAccessing PhaserLink Help Setting printer parameters PhaserLink software pages Information ForwardingDisabling Information Forwarding With config-IP script With config-TokenRingscript IndexRarp Page Printed on recycled paper
Top Page Image Contents