Tektronix Phaser 840 setup guide Before you begin network configuration, Printing a Configuration

1 Introduction

Before you begin network configuration

■Set up your printer and connect it to the network. See your printer’s user documentation for information about setting up the printer. For information about connecting the printer to the network, see Chapter 2 of this manual, “Connecting Your Printer to a Network”.

■Install the Tektronix driver for your printer on every Macintosh and PC that will send print jobs to the printer. For details on driver installation, see your printer’s user documentation.

■For NetWare environments. To speed the setup process and avoid conflicts, familiarize yourself with the components of your network. You should know which version(s) of NetWare are installed, which versions of client software are used, and the network topology (frame types, routers, hubs, and cabling).

Printing a Configuration Page

Your printer’s Configuration Page supplies useful information for installing and configuring the printer on a network.

Printing a Configuration Page

1.When the front panel displays READY TO PRINT, press the down-arrow button until Menu is highlighted. Press Select.

2.Press the down-arrow button until Printer Configuration is highlighted. Press Select.

3.Press the down-arrow button until Print Configuration Page is highlighted. Press Select.

2PhaserShare Networking