Transcend Information TS32GSSD25-S, TS128GSSD25-M Recalibrate 10h, Security Disable Password F6h

Page 21

TS8GSSD25-S

 

TS16GSSD25-S

 

TS32GSSD25-S/M

 

TS64GSSD25-S/M

2.5” Solid State Disk

TS128GSSD25-M

RECALIBRATE (10h)

The current drive performs no processing if it receives this command. It is supported for backward compatibility with previous devices.

SECURITY DISABLE PASSWORD (F6h)

Disables any previously set user password and cancels the lock. The host transfers 512 bytes of data, as shown in the following table, to the drive. The transferred data contains a user or master password, which the drive compares with the saved password. If they match, the drive cancels the lock. The master password is still saved. It is re-enabled by issuing the SECURITY SET PASSWORD command to re-set a user password.

SECURITY ERASE PREPARE (F3h)

This command shall be issued immediately before the Security Erase Unit command to enable erasing and unlocking. This command prevents accidental loss of data on the drive.

SECURITY ERASE UNIT (F4h)

The host uses this command to transfer 512 bytes of data, as shown in the following table, to the drive. The transferred data contains a user or master password, which the drive compares with the saved password. If they match, the drive deletes user data, disables the user password, and cancels the lock. The master password is still saved. It is re-enabled by issuing the SECURITY SET PASSWORD command to re-set a user password.

SECURITY FREEZE LOCK (F5h)

Causes the drive to enter Frozen mode. Once this command has been executed, the following commands to update a lock result in the Aborted Command error:

•SECURITY SET PASSWORD

•SECURITY UNLOCK

•SECURITY DISABLE PASSWORD

•SECURITY ERASE PREPARE

•SECURITY ERASE UNIT

The drive exits from Frozen mode upon a power-off or hard reset. If the SECURITY FREEZE LOCK command is issued when the drive is placed in Frozen mode, the drive executes the command, staying in Frozen mode.

Transcend Information Inc.

21

V1.08

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Dimensions Placement FeaturesDescription V1.08Specifications Model P/N Sequential ReadMax Sequential WriteMaxModel P/N User Max. LBA Cylinder Head Sector Data Reliability Data Retention Operating Non-OperatingCompliance TS128GSSD25-M Package DimensionsPin Assignments Pin LayoutPin No Pin Name Block Diagram Wear-Leveling algorithm ReliabilityECC algorithm Bad-block managementCommand Name Code Support ATA/ATAPI Command ListSET Multiple Mode ATA Command Specifications Word Value Description Identify Device Information Default ValuePIO data transfer cycle timing mode Reserved TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M Minor version number TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M Idle Immediate E1h Idle E3hInitialize Device Parameters 91h Read Buffer E4hRead LOG EXT 2Fh Log Address Log Name Feature Set AccessRead Multiple C4h Read Multiple EXT 29hRecalibrate 10h Security Disable Password F6hSecurity Erase Prepare F3h Security Erase Unit F4hSecurity Unlock information Security set Password data contentFeatures register Value and settable operating mode DAh D9hByte Description Byte 2-361 Individual attribute dataDescription Detail Information Byte Attribute ID information is listed in the following tableSmart Read Attribute Threshold Smart Enabl Operations Standby Immediate E0h Standby E2hWrite Buffer E8h Write DMA CAhWrite Multiple FUA EXT CEh Write Multiple EXT 39hWrite Sectors 30h/31h Write Sectors EXT 34hUltra DMA data transfer Transcend Information IncUltra DMA data burst timing requirements Name Comment Initiating an Ultra DMA data-in burst Sustained Ultra DMA data-in burst Host pausing an Ultra DMA data-in burstDevice terminating an Ultra DMA data-in burst Host terminating an Ultra DMA data-in burst Initiating an Ultra DMA data-out burst Sustained Ultra DMA data-out burst Device pausing an Ultra DMA data-out burstHost terminating an Ultra DMA data-out burst Device terminating an Ultra DMA data-out burst PIO timing requirements PIO data transferPIO data transfer to/from device Taiwan Germany Ordering Information
Top Page Image Contents