Transcend Information TS64GSSD25-M, TS128GSSD25-M, TS16GSSD25-S Smart Read Attribute Threshold

Page 26

TS8GSSD25-S
TS16GSSD25-S
TS32GSSD25-S/M
TS64GSSD25-S/M					2.5” Solid State Disk
TS128GSSD25-M					2.5” Solid State Disk


				5	Max Erase Count (Low Byte)
				6	Reserved
				7	Reserved
	EBh		Good Block Count, System Block Count	0	Good Block Count (High Byte)
				1	Good Block Count
				2	Good Block Count (Low Byte)
				3	System(Free) Block Count (High
				4	Byte)
				5	System(Free) Block Count (Low
				6	Byte)
				7	Reserved
					Reserved
					Reserved
	ECh-FFh		Reserved

SMART READ ATTRIBUTE THRESHOLD

This transfers 512 bytes of drive failure threshold data to the host.

SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE

Enables or disables the attribute value autosave function. This command specifies whether the current attribute values are automatically saved to the drive when it changes the mode. This setting is maintained when the power is turned on and off.

SMART SAVE ATTRIBUTE VALUE

Saves any modified attribute values.

SMART EXECUTE OFF-LINE IMMEDIATE

This command of Non-data input causes the controller to immediately initiate the set of activities that collect SMART data in a off-line mode and then save data to the Nand flash memory, or execute a selfdiagnostic test routine in either captive or off-line mode.

Transcend Information Inc.

26

V1.08

Image 26

Contents Description Placement FeaturesDimensions V1.08Specifications Model P/N User Max. LBA Cylinder Head Sector Model P/N Sequential ReadMaxSequential WriteMax Compliance Data Reliability Data RetentionOperating Non-Operating Package Dimensions TS128GSSD25-MPin No Pin Name Pin AssignmentsPin Layout Block Diagram ECC algorithm ReliabilityWear-Leveling algorithm Bad-block managementSupport ATA/ATAPI Command List Command Name CodeSET Multiple Mode ATA Command Specifications Identify Device Information Default Value Word Value DescriptionPIO data transfer cycle timing mode Reserved TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M Minor version number TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M TS8GSSD25-S TS16GSSD25-S TS32GSSD25-S/M TS64GSSD25-S/M Initialize Device Parameters 91h Idle E3hIdle Immediate E1h Read Buffer E4hRead Multiple C4h Log Address Log Name Feature Set AccessRead LOG EXT 2Fh Read Multiple EXT 29hSecurity Erase Prepare F3h Security Disable Password F6hRecalibrate 10h Security Erase Unit F4hSecurity set Password data content Security Unlock informationFeatures register Value and settable operating mode Byte Description D9hDAh Byte 2-361 Individual attribute dataAttribute ID information is listed in the following table Description Detail Information ByteSmart Read Attribute Threshold Smart Enabl Operations Write Buffer E8h Standby E2hStandby Immediate E0h Write DMA CAhWrite Sectors 30h/31h Write Multiple EXT 39hWrite Multiple FUA EXT CEh Write Sectors EXT 34hUltra DMA data burst timing requirements Ultra DMA data transferTranscend Information Inc Name Comment Initiating an Ultra DMA data-in burst Host pausing an Ultra DMA data-in burst Sustained Ultra DMA data-in burstDevice terminating an Ultra DMA data-in burst Host terminating an Ultra DMA data-in burst Initiating an Ultra DMA data-out burst Device pausing an Ultra DMA data-out burst Sustained Ultra DMA data-out burstHost terminating an Ultra DMA data-out burst Device terminating an Ultra DMA data-out burst PIO data transfer PIO timing requirementsPIO data transfer to/from device Ordering Information Taiwan Germany