Contents
1.Presentation
1.1 | Standard positions | 6 |
| Tower position | 6 |
| Rack position | 6 |
1.2 | Rear panels | 7 |
| Pulsar M 2200 / 3000 | 7 |
| Pulsar M EXB (optional battery module) | 7 |
1.3 | Control panel | 7 |
2.Installation
2.1 | Unpacking and contents check | 8 |
2.2 | Installation in tower position | 9 |
2.3 | Installation in rack position | 9 |
2.4 | Communication ports | 10 |
| Connection of RS232 or USB communication port (optional) | 10 |
| Installation of the communication cards (optional) | 10 |
2.5 | Connection with a FlexPDU (Power Distribution Unit) module | 11 |
2.6 | Connection with a HotSwap MBP module | 11 |
| HotSwap | 12 |
2.7 | UPS connection without a FlexPDU or HotSwap MBP module | 12 |
3.Operation
3.1 | 13 | |
3.2 | Operation on battery power | 13 |
3.3 | Return of AC power | 14 |
3.4 | UPS shutdown | 14 |
3.5 | Using the UPS remote control functions | 14 |
4.Access to measurements and personalisation data
4.1 | Display menus arrangement | 16 |
4.2 | Access to measurements | 16 |
4.3 | Personalisation using the control panel | 16 |
4.4 | Personalisation using external software | 17 |
5.Maintenance
5.1 | Troubleshooting | 18 |
| Troubleshooting a UPS equipped with the HotSwap MBP module | 19 |
5.2 | 19 | |
| Safety recommendations | 19 |
| 19 | |
| Mounting the new battery module | 20 |
5.3 | Maintenance on a UPS equipped with the HotSwap MBP module | 20 |
5.4 | Training centre | 21 |
6.Appendices
6.1 | Technical specifications | 22 |
6.2 | Glossary | 23 |