MGE UPS Systems 3000 RT 3U XL, EXB RT 3U, 2200 RT 3U Appendices, Technical specifications

6. Appendices

6.1 Technical specifications

	Pulsar M 2200		Pulsar M 3000	Pulsar M 3000 XL	Pulsar M EXB
Output power	2200 VA (1) /		3000 VA (2) /	3000 VA (2) /
	1980 W		2700 W (3)	2700 W
Electrical supply network
◗ Rated input voltage			Single phase 230 V
◗ Input voltage range	110 / 140 / 200 V to 284 V (4)
◗ Frequency		50/60 Hz (autoselection)
◗ Power factor		> 0.95
◗ Leakage current			< 2 mA
Load output
◗ Voltage	Single phase 230 V ±3% (5)
◗ Frequency			50/60 Hz ±0,5% (6)
◗ Harmonic distortion			< 4% for linear load,
		< 6% for nonlinear load
◗ Overload capacity	102% continuous, 105% 20s, > 130% 1.5s
◗ Current	9.6 A (7)		13 A (8)
Battery	6 x 12V - 7 Ah,		6 x 12V - 9 Ah,	without internal	Two 6 x 12 V - 9 Ah
	sealed lead acid,		sealed lead acid,	battery	strings, sealed lead
	maintenance free		maintenance free		acid, maintenance
					free
Environment
◗ Operating temperature range			O°C to 40°C
◗ Relative humidity			20% to 90% (without condensation)
◗ Storage temperature range			-25°C to 40°C
◗ Altitude			1000 m
◗ Noise level
	< 46 dBA			< 50 dBA

(1)Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the output power is 1980VA / 1980VA / 2200VA / 2200VA / 2200VA.

(2)Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the output power is 2700VA / 2700VA / 3000VA / 3000VA / 3000VA.

(3)Standard output power is 2700 W, 2400 W with an EXB module.

(4)Values for 33% / 66% / 100% of UPS output.

(5)Programmable: 200V / 208V / 220V / 230V / 240V using the UPS Config software.

(6)Frequency-converter mode is programmable using the UPS Config software.

(7)Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the maximum output current is 9.9A / 9.5A / 10A / 9.6A / 9.2A.

(8)Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the output current is

13.5A / 13A / 13.6A / 13A / 12.5A.

34007776EN/AB - Page 22