Options

cfront panel LEDs signal all types of faults and alarms;

cBar graph continuously indicates the battery charge level or the critical load power level;

cPulsar EX20 and EX30 are environment friendly: all components are recyclable and an electronic power-saver device reduces power consumption if the UPS is not active for a period exceeding 5 minutes while on battery back-up;

cEX Driver software provides rapid startup of Pulsar EX20 and EX30 using the EX Tuner configuration module. This module adapts Pulsar EX20 and EX30 to user preferences (battery test frequency, startup and shutdown sequences, setting of battery thresholds, etc.). Operation and monitoring are ensured by the UPS Manager 3.1 module operating under Windows 3.1.

EX Driver connects to the RS 232 port on the Pulsar EX20 and EX30 (see "communication" section for further details);

cSolution-PacTMis a CD-ROM which contains all the tools needed to supervise your UPS.

crack installation kit: this kit is used to install Pulsar EX20 and EX30 in a 19-inch rack;

cUM Sensor environment measurement unit: compatible with SNMP and UPS Manager 2 Unix and OS/2, or Solution PacTM, this unit measures the temperature and the relative humidity in the room where the Pulsar is installed. Eight relay contacts are provided to transmit signals to an administration platform, in the form of voltage-free contacts to enable monitoring of (fire alarm, climate control fault, intrusion, etc.);

cbattery extension module: Pulsar EXB20/30 battery extension modules lengthen the battery time of the Pulsar EX20/EX30 to meet your requirements;

cisolation transformer: input line cord plugs into the Pulsar EX30 output receptacle. Rating is 120V AC input, 208V/ 240V AC 2.75 kVA output;

cmaintenance bypass switch: enables the user to continue supplying ac power to the load while performing routine or emergency maintenance.

additional communications options:

ccommunication cables: these cables are used for the file-closing utilities offered by a number of network operating systems. They are available for Novell NetWare, Microsoft Lan Manager and Windows NT, IBM Lan Server, Artisoft LANtastic, Banyan Vines, Apple System 7, IBM AS400 and many others;

cUPS Manager 2 communication software: this software can be used for automatic file closing on one or more servers, as well as for remote UPS shutdown and interrogation of all Pulsar EX20 and EX30 operating parameters. It is available for Novell NetWare, Microsoft Lan Manager, IBM Lan Server, the main Unix systems on the market (SCO, AIX, HP/UX, OSF 1, etc.) VAX UMS and many others;

cSNMP administration: Merlin Gerin has the most complete offering for the administration of a group of UPSs using the SNMP protocol with different network- connection modules (UM Link adaptor or proxy UM Agent software), supervision modules (dedicated software under Windows UM View or application for NMS platforms such as HP OpenView or Novell NMS) and a file-closing module (UM Client). The MGE UPS SYSTEMS offering complies with RFC 1628 specifications (IETF) and was certified by the InterWorking Labs during the Test Summit in June 1994;

cSNMP card: this card, inserted into your unit, makes your UPS SNMP-compatible in any environment;

cstatus information card: this option provides you with 5 voltage-free contacts: on battery, on by-pass, low battery, load on UPS.

Contact your dealer for further information on these options.

MGE UPS SYSTEMS

Pulsar EX : 51032278XT/AB