MGE UPS Systems GES-202L, GES-152L, GES-302L, GES-801L, GES-102L user manual Introduction

Page 5

Always “On” UPS Systems Inc.

Introduction

The L-Series is a Line Interactive UPS system that includes the newest and latest technology enhancements. The Line Interactive technology with AVR function (on- line voltage boost-up & buck-down) allows for a wide input voltage range of 90 to 150VAC. The L-Series UPS is the ideal protection for microprocessor controlled loads. With the utility power connected, the charger begins to operate immediately, charging the battery. In the event of a blackout (or severe brownout) the UPS will automatically switch to back-up mode and maintain power to the load until the software shuts down the system and/or when the battery reaches a low voltage state. The Low Battery indicator will turn “On” if and when the battery needs replacement. Also included, with our UPS systems, is a cyclic self-testing function to verify both the operation of the UPS and the condition of the battery.

In addition, the L-Series UPS provides advanced telephone line and Ethernet surge suppression through the modular connectors on the back panel.

The Line Interactive UPS in conjunction with our monitoring software makes your UPS operate intelligently and provides you with total protection for all your loads.

Note: Interference to radio/TV might occur in a particular installation. If this UPS causes interference to radio or television reception, which can be determined by turning the UPS off and on, the user is encouraged to try to correct the interference by one or more of following measures:

1.Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

2.Increase the separation between the equipment and the receiver.

3.Reorientate the receiving antenna.

5

Image 5
Contents Uninterruptible Power Supply Always On UPS Systems Inc Always On UPS Systems Inc Battery Replacement Troubleshooting Storage Introduction 36VDC Safety InstructionsFront Panel PresentationTELEPHONE/MODEM/ETHERNET Surge Protection Rear PanelSite Wiring Fault Indicators RED LED Installation Check the Site Wiring Fault Indicator Connecting the Telephone/Modem/Ethernet LinesOperation Audible Alarm Interface Kits Software OptionsUPSilon 2000 Software RS-232 Communication Computer Interface PortOpen Collector Dry Contact Communication Remove watches, rings, etc Use tools with insulated handles Battery ReplacementSolution TroubleshootingProblems Possible causes Extended Storage StorageStorage Conditions Black RED Battery Bank InstallationSpecification SpecificationsGES-801LR GES-102LR GES-152LR GES-202LR GES-302LR Software Questions Additional Purchases or UpgradesQA / Warranty Questions