APC NBRK0200 configurationmanual Power cord and network cable connections

Page 12

Power cord and network cable connections

Perform the steps below to complete the installation of the Rack Monitor 200.

Caution: Before you energize the Rack Monitor 200, review the electrical specifications on page 23 to avoid overloading the circuit providing power.

Caution: Make sure you properly ground the Rack Monitor 200 by plugging it directly into a wall outlet or by verifying the ground path if you connect the appliance to a power strip.

1.Connect the appropriate power cord to the AC Line Inlet of the Rack Monitor 200.

2.Secure the power cord to the power cord retainer bracket using the tie wraps.

3.Connect your 10/100 Base-T Network cable to the Rack Monitor 200.

4.Plug the power cord into a power source.

5.Use the hook and loop cable strap and the 25-mm (1-in) wide tie wrap to secure cables.

8	NetBotz Rack Monitor 200 Installation and Quick Configuration Manual

Image 12

Contents Installation Quick Configuration Manual Manual em Português está disponível no CD-ROM em anexo Contents Access the Rack Monitor Introduction Product DescriptionDocument Overview Additional DocumentationReceiving Inspection InventoryAdditional Options InfraStruXure-certifiedInstallation Physical DescriptionRear FrontDescription How to Install the Rack Monitor Toolless peg-mount installationRack-mount installation Power cord and network cable connections How to Install the Temperature/Humidity Sensor How to Connect Sensors to Universal Sensor Ports How to Connect an Alarm Beacon and Other Optional Devices How to Cascade Devices to A-Link Ports How to Wire to the Modbus Interface Quick Configuration Server type ProcedureHow to set up option How to disable the cookie requirementDhcp Server Important Information about the Default Gateway How to Update the Bootptab FileHow to Use the APC Device IP Configuration Wizard How to Use ARP, Ping, and Telnet Use apc for both User Name and PasswordHow to access the control console Control ConsoleAccess the Rack Monitor Web InterfaceTelnet and SSH Simple Network Management Protocol Snmp How to Recover from a Lost Password ModbusSpecifications NetBotz Rack Monitor 200 NBRK0200Temperature/Humidity Sensor AP9335TH System SpecificationsWarranty and Life Support Two-Year Factory WarrantyTerms of warranty Non-transferable warranty ExclusionsWarranty claims Obtaining service Life Support Policy General policyExamples of life-support devices Page Page Page Radio Frequency Interference Canada-ICESJapan-VCCI Taiwan-BSMI990-3283-001 2008