APC NBRK0200 configurationmanual How to Connect Sensors to Universal Sensor Ports

Page 14

How to Connect Sensors to Universal Sensor Ports

This procedure applies to the following sensors, which are supported by the Rack Monitor 200 and connect to the universal sensor ports:

Temperature Sensor (AP9335T)

Temperature/Humidity Sensor (AP9335TH)

NetBotz 3.65-m (12-ft) Door Switch Sensor for APC Racks (NBES0303)

NetBotz 15.24-m (50-ft) Door Switch Sensor for Rooms or Third Party Racks (NBES0302)

NetBotz Dry Contact Cable (NBES0304)

For sensors that connect to A-Link ports (Temperature Sensors with Digital Display [AP9520T] and Temperature/Humidity Sensors with Digital Display [AP9520TH]), see “How to Cascade Devices to A-Link Ports” on page 12.

Caution: Plugging an incompatible sensor into a port can result in undefined behavior.

Connect APC and third-party dry contact sensors to the six universal sensor ports, labeled Sensors, on the Rack Monitor 200.

Third-party dry contact sensors require the NetBotz Dry Contact Cable (NBES0304). To connect a sensor to the cable, follow the instructions provided with the sensor and the instructions provided with the cable.

The length of a sensor cable can be extended using RJ-45 female-to-female couplings and standard CAT-5 cabling. See “System Specifications” on page 24 for maximum cable lengths.

10

NetBotz Rack Monitor 200 Installation and Quick Configuration Manual

Image 14
Contents Installation Quick Configuration Manual Manual em Português está disponível no CD-ROM em anexo Contents Access the Rack Monitor Document Overview IntroductionProduct Description Additional DocumentationReceiving Inspection InventoryAdditional Options InfraStruXure-certifiedRear InstallationPhysical Description FrontDescription How to Install the Rack Monitor Toolless peg-mount installationRack-mount installation Power cord and network cable connections How to Install the Temperature/Humidity Sensor How to Connect Sensors to Universal Sensor Ports How to Connect an Alarm Beacon and Other Optional Devices How to Cascade Devices to A-Link Ports How to Wire to the Modbus Interface Quick Configuration Server type ProcedureDhcp Server How to set up optionHow to disable the cookie requirement Important Information about the Default Gateway How to Update the Bootptab FileHow to Use the APC Device IP Configuration Wizard How to Use ARP, Ping, and Telnet Use apc for both User Name and PasswordHow to access the control console Control ConsoleTelnet and SSH Access the Rack MonitorWeb Interface Simple Network Management Protocol Snmp How to Recover from a Lost Password ModbusSpecifications NetBotz Rack Monitor 200 NBRK0200Temperature/Humidity Sensor AP9335TH System SpecificationsTerms of warranty Warranty and Life SupportTwo-Year Factory Warranty Non-transferable warranty ExclusionsWarranty claims Obtaining service Examples of life-support devices Life Support PolicyGeneral policy Page Page Page Japan-VCCI Radio Frequency InterferenceCanada-ICES Taiwan-BSMI990-3283-001 2008