APC NBRK0200 Life Support Policy, General policy, Examples of life-support devices

Page 31

Life Support Policy

General policy

American Power Conversion (APC) does not recommend the use of any of its products in the following situations:

In life-support applications where failure or malfunction of the APC product can be reasonably expected to cause failure of the life-support device or to affect significantly its safety or effectiveness.

In direct patient care.

APC will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to APC that (a) the risks of injury or damage have been minimized, (b) the customer assumes all such risks, and (c) the liability of APC is adequately protected under the circumstances.

Examples of life-support devices

The term life-support device includes but is not limited to neonatal oxygen analyzers, nerve stimulators (whether used for anesthesia, pain relief, or other purposes), autotransfusion devices, blood pumps, defibrillators, arrhythmia detectors and alarms, pacemakers, hemodialysis systems, peritoneal dialysis systems, neonatal ventilator incubators, ventilators (for adults and infants), anesthesia ventilators, infusion pumps, and any other devices designated as “critical” by the U.S. FDA.

Hospital-grade wiring devices and leakage current protection may be ordered as options on many APC UPS systems. APC does not claim that units with these modifications are certified or listed as hospital- grade by APC or any other organization. Therefore these units do not meet the requirements for use in direct patient care.

NetBotz Rack Monitor 200 Installation and Quick Configuration Manual

27

Image 31
Contents Installation Quick Configuration Manual Manual em Português está disponível no CD-ROM em anexo Contents Access the Rack Monitor Additional Documentation IntroductionProduct Description Document OverviewInventory Receiving InspectionInfraStruXure-certified Additional OptionsFront InstallationPhysical Description RearDescription Toolless peg-mount installation How to Install the Rack MonitorRack-mount installation Power cord and network cable connections How to Install the Temperature/Humidity Sensor How to Connect Sensors to Universal Sensor Ports How to Connect an Alarm Beacon and Other Optional Devices How to Cascade Devices to A-Link Ports How to Wire to the Modbus Interface Server type Procedure Quick ConfigurationHow to disable the cookie requirement How to set up optionDhcp Server How to Update the Bootptab File Important Information about the Default GatewayHow to Use the APC Device IP Configuration Wizard Use apc for both User Name and Password How to Use ARP, Ping, and TelnetControl Console How to access the control consoleWeb Interface Access the Rack MonitorTelnet and SSH Simple Network Management Protocol Snmp Modbus How to Recover from a Lost PasswordNetBotz Rack Monitor 200 NBRK0200 SpecificationsSystem Specifications Temperature/Humidity Sensor AP9335THNon-transferable warranty Exclusions Warranty and Life SupportTwo-Year Factory Warranty Terms of warrantyWarranty claims Obtaining service General policy Life Support PolicyExamples of life-support devices Page Page Page Taiwan-BSMI Radio Frequency InterferenceCanada-ICES Japan-VCCI2008 990-3283-001