APC NBRK0200 configurationmanual Receiving Inspection, Inventory

Page 6

Receiving Inspection

Inspect the package and its contents for shipping damage and ensure that the parts included in the shipment match all of the parts listed in the inventory table. Immediately report any shipping damage to the shipping agent. Report missing contents, damage, or other problems to APC or your APC reseller.

The shipping materials are recyclable. Please save them for later use, or dispose of them appropriately.

Inventory

Quantity	Item

1	NetBotz Rack Monitor 200 (NBRK0200)

1	Hardware kit for NetBotz Rack Monitor 200

	Quantity	Item

	2	Brackets for a standard 19-in rack

	1	Power cord retainer bracket

	4	8-32 x 1/4-in Phillips-head screws

	2	203-mm (8-in) nylon tie wrap

	1	203-mm (8-in) hook and loop cable strap

1	Null modem, DB9F to DB9F, serial RS-232 configuration cable

1	1.8-m (6-ft) IEC-320-C13 to IEC-320-C14 power cord

1	1.8-m (6-ft) NEMA 5-15P to IEC-320-C13 power cord

2	A-Link terminators

1	Modbus resistor kit

	Quantity	Item

	2	1/4-W, 150-ohm resistors

	2	1/4-W, 499-ohm resistors

2	25-mm (1-in) wide nylon cable tie

1	NetBotz Rack Monitor 200 Utility CD

1	Temperature/Humidity Sensor (AP9335TH)

2	NetBotz Rack Monitor 200 Installation and Quick Configuration Manual

Image 6

Contents Installation Quick Configuration Manual Manual em Português está disponível no CD-ROM em anexo Contents Access the Rack Monitor Document Overview IntroductionProduct Description Additional DocumentationReceiving Inspection InventoryAdditional Options InfraStruXure-certifiedRear InstallationPhysical Description FrontDescription How to Install the Rack Monitor Toolless peg-mount installationRack-mount installation Power cord and network cable connections How to Install the Temperature/Humidity Sensor How to Connect Sensors to Universal Sensor Ports How to Connect an Alarm Beacon and Other Optional Devices How to Cascade Devices to A-Link Ports How to Wire to the Modbus Interface Quick Configuration Server type ProcedureHow to set up option How to disable the cookie requirementDhcp Server Important Information about the Default Gateway How to Update the Bootptab FileHow to Use the APC Device IP Configuration Wizard How to Use ARP, Ping, and Telnet Use apc for both User Name and PasswordHow to access the control console Control ConsoleAccess the Rack Monitor Web InterfaceTelnet and SSH Simple Network Management Protocol Snmp How to Recover from a Lost Password ModbusSpecifications NetBotz Rack Monitor 200 NBRK0200Temperature/Humidity Sensor AP9335TH System SpecificationsTerms of warranty Warranty and Life SupportTwo-Year Factory Warranty Non-transferable warranty ExclusionsWarranty claims Obtaining service Life Support Policy General policyExamples of life-support devices Page Page Page Japan-VCCI Radio Frequency InterferenceCanada-ICES Taiwan-BSMI990-3283-001 2008