USER’S GUIDE switched rack pdu
®
Link-RX/TX (10/100) LED
This LED indicates the network status.
Condition | Description | |
|
| |
Off | The device which connects the PDU to the network is off or not | |
operating correctly. | ||
| ||
|
| |
Flashing Green | The PDU is receiving data packets from the network at 10 | |
Megabits per second (Mbps). | ||
| ||
|
| |
Flashing Orange | The PDU is receiving data packets from the network at 100 | |
Megabits per second (Mbps). | ||
| ||
|
| |
Solid Green or | The Switched Rack PDU is receiving no network traffic. | |
Orange | ||
| ||
|
|
Status LED
This LED indicates the network status of the PDU.
Condition | Description | |
|
| |
Off | The PDU has no power. | |
|
| |
Solid Green | The PDU has valid TCP/IP settings. | |
|
| |
Flashing Green | The PDU does not have valid TCP/IP settings.1 | |
Solid Orange | A hardware failure has been detected in the PDU. Contact APC | |
Worldwide Customer Support. | ||
| ||
|
| |
Flashing Orange | The PDU is making BOOTP2 requests. |
1 If you do not use a BOOTP server, see the Switched Rack PDU Installation and Quick Start Manual provided in PDF on the APC Switched Rack Power Distribution Unit Utility CD and in printed format to configure the TCP/IP settings.
2 To use a BOOTP server, see the Management Card Addendum (.\doc\Addendum.pdf) on the APC Switched Rack Power Distribution Unit Utility CD.
10