USER’S GUIDE switched rack pdu
®
Synchronize with Network Time Protocol (NTP) Server. Use this option on the web interface, or Network Time Protocol (NTP) on the control console, to have an NTP Server automatically update the Date and Time settings for the Switched Rack PDU.
In the control console, use the NTP Client option to enable or disable the NTP Server updates. In the Web interface, use the Set Manually option. The updates are disabled by default.
Setting | Definition | |
|
| |
Primary NTP Server | Identifies the IP address of the primary NTP server. | |
|
| |
Secondary NTP Server | Identifies the IP address of the secondary NTP server | |
when a secondary server is available. | ||
| ||
|
| |
| Defines the offset to be used from Greenwich Mean Time | |
Time Zone | (GMT) based on the time zone in which the Switched Rack | |
| PDU is located. | |
|
| |
| Defines how often, in weeks, the Switched Rack PDU will | |
Update Interval | access the NTP Server for an update (1 week minimum, | |
52 weeks maximum). Use Update Using NTP Now to | ||
| ||
| initiate an immediate update as well. | |
|
|
Tools
Use this option to restart the Switched Rack PDU or to reset some or all of its configuration settings to their original default values.
Action | Definition |
|
|
No Action (Web Interface | No change to the Switched Rack PDU. |
only). |
|
|
|
Reboot | Restarts the Switched Rack PDU. |
|
|
58