How to Use the Minute/Second ~mer
The MIN/SEC TIMER has three timing functions:
●It operates as a minute timer.
. It can be set to delay cooking.
Q It can be used as a hold setting after defrosting.
The MIN/SEC TIMER operates without microwave energy.
How to ~me a 3-Minute Phone Call
1. Touch MIN/SEC TIMER pad. The display shows “: O“ and “ENTER TIME” flashes.
2.Touch number pads 3,0 and O (for 3 minutes and no seconds). Display shows “3:00” and “TIME:’
3.Touch START. Display shows time counting down.
4.When time is up, oven signals, flashes “End,” and display shows time of day.
Programming a Holding ~me
The Minute/Second Timer can also be used to program a holding time between rnicmve cooking functions. The time can range from one saond to 99 minutes and 99 seconds. A holding or standing time maybe requested in some of your own recipes or cookbook.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds, touch TIME COOK I or TEMP COOK/HOLD and enter cook time or temp. Touch MIN/SEC T~ER and enter number of minutes to delay cooking. Touch START. Timer will count down to zero and cooking will begin. When delaying temperature cooking, be sure that probe is in food before pressing
START.
How to ~me Defrost, Hold and ~me Cook
Let’s say you want to defrost a fromn casserole for 15 minutes, hold for 10 minutes and then Time Cook for
25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer and place in oven.
Step 2: Touch TIME DEFROST pad.
The display shows “: O“ and “POWER 3V’ “ENTER DEF TIME” flashes.
Step 3: Touch pads 1,5,0 and O for 15 minutes defrosting time. “15:00” appears on display. (Defrosting is automatically set on power level 3 but can be changed by touching the POWER LEVEL pad and the desired power level.)
MIN/SEC
LO | T :::: R | |
BE) | ||
| ||
| ..,...:::....., | |
|
|
Step 4: Set holding or standing time by touching M~/SEC T~ER. The display shows “: O“ and “ENTER TIME” flashes.
Step 5: Touch 1,0,0 and O to hold for ten minutes. “10:00’7 appears on display and “TIME” flashes.
Step 6: Touch TIME COOK I pad.
The display shows “: O“ and “POWER 10V’ “ENTER COOK TIME 1“ flashes.
Step 7: Touch 2,5,0 and O for
Step 8: Touch START. “DEF TIME” and “U:OO” counting down show on display. As each function is automatically performed, oven display shows instructions entered and the function.
Step 9: When time is up, the oven signals, flashes “End” and shuts off.
Questions and Answers
Q. What will happen if I accidentally reverse my defrost, hold and cook instructions?
A. The oven will automatically rearrange your program. Defrosting will always come first, then hold, and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only want to defrost a food, hold it, and cook it later. All you need to do is program in Time Defrost and amount of time. Then program a holding time (example in steps 4 and 5 at left). Be sure to put the thawed dish in the refrigerator promptly.
N~E: Let foods remain at room temperature only as long as safe. Times will vary.
Q. I programmed my oven for a specific defrosting time but it defrosted longer than necessary. What happened?
A. When instructions conflict, the oven carries out the last instruction. You may have set the oven to Defrost for 4 minutes, Hold/Time for 2 minutes, and then Defrost for 6 minutes. In this case, the oven would Defrost for 6 minutes and Hold/Time for 2 minutes.
