JVC HR-S9400U On-Screen Timer Programming, Access ON-SCREEN, Menu, Access Program SET Screen

48ENTIMERRECORDING(cont.)

On-Screen

Timer

Programming

8

CH

MENU OK

1 2 3

NUMBER 4 5 6

7 8 9

0

CH

OK

MENU

TIME SCAN

ILLUMI GUIDE

When Using The Illumi-Guide Feature

●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and re-perform the timer programming procedure from the beginning.

●If for some reason the remote control's signal is not received by the VCR, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and re-perform the timer programming procedure from the beginning.

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 8 or 9).

You can also use the optional Illumi-Guide feature, where the relevant buttons on the remote control light to tell you which button to press next. The Illumi-Guide feature is activated by the ILLUMI GUIDE button on the remote control. The Illumi-Guide feature is only active when the remote control's TV/CABLE/VCR switch is set to "VCR". (Illumi-Guide is an optional help feature which makes programming easier. It is not necessary to use Illumi-Guide to program the VCR.)

1	LOAD A CASSETTE
	Make sure the record safety tab is intact. If not, cover
	the hole with adhesive tape, then load.
	● The VCR comes on, and the counter is reset,
	automatically.

	ACCESS ON-SCREEN
2	MENU
	To use the Illumi-Guide feature press ILLUMI GUIDE.
	The MENU, REW, PLAY and FF buttons will light.
	Press MENU as many times as necessary to bring up the
	Main Menu screen.
	● If you are using the Illumi-Guide feature, MENU
	lights up and OK blinks.

ACCESS PROGRAM SET SCREEN

3	Make sure the arrow is to the left of "PROGRAM SET",
	then press OK.
	● If you are using the Illumi-Guide feature, OK blinks
	when the following buttons are lit: NUMBER keys (0
	– 9), TIME SCAN, CANCEL and MENU.
	SELECT PROGRAM NUMBER
	Press the appropriate	PROGRAM 1
	NUMBER keys or CH5°or
4 TIME SCAN 5°to select a		DATE	- - / - -
		START	- - : - - AM
	vacant program number,	STOP	- - : - - AM
	then press OK. The first time	CHANNEL	- - SP
	you set the timer program-	PRESS NUMBER KEY(0-9)
	ming function, all the
		OR (5,°), THEN (OK)
	program numbers will be	PRESS (MENU) TO END
	blank; in this case just press
	OK when the Program Set screen appears.

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0 – 9), TIME SCAN, CANCEL and MENU.