![](/images/new-backgrounds/1278193/278193109x1.webp)
Audio Dubbing
E
N
55
Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Use your VCR as the recorder.
PAUSE | PLAY |
8 |
STOP |
Normal audio track
Pre-recorded tape
Audio-dubbed tape
Audio cable
Audio component (CD player etc.)
NOTES:
● When monitoring the sound during Audio Dubbing, the normal soundtrack is automatically selected. If you wish to hear the
● Audio dubbing stops automatically when the counter reaches "0H00M00S", and the VCR enters the Play mode. Check the counter reading before dubbing.
● Audio dubbing is also possible using the rear AUDIO IN connectors. When using these connectors, be sure to select "REAR
● Audio dubbing cannot be performed on a cassette that has had its record safety tab removed.
● When playing back an
● Picture may be distorted during Audio Dubbing Pause. ● It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
MAKE CONNECTIONS
1 Connect an audio component to the AUDIO IN L + R connectors on the VCR's front panel. *When connect- ing monaural equipment, use only the VCR's AUDIO IN L connector.
2 | SET INPUT MODE |
Press NUMBER key "0" on the remote control. "AU" | |
appears in place of a channel number. | |
● Be sure to select "FRONT | |
| at the AUX Input Screen. (To select the correct AUX |
| input connector, follow steps 4, 9 – 11, 15 from the |
| "Edit From A Camcorder" section, ☞ pg. 52.) |
| LOCATE START POINT |
| Press PLAY to start playback of the tape in your VCR, |
| and press PAUSE when you find the point where you |
3 want to start dubbing. | |
4 | ENGAGE AUDIO DUBBING |
Press A. DUB. | |
| |
● Your VCR enters the Audio Dubbing Pause mode. | |
(REC blinks, PLAY and PAUSE light up on the front | |
| display panel.) |
|
|
| START DUBBING |
| Engage the audio component's Play mode, then press |
| PLAY to start the tape in your VCR. Audio dubbing |
5 begins at this point. | |
| ● REC blinks and PLAY is displayed on the front display |
| panel. |
| ● To stop dubbing temporarily, press PAUSE. Press |
| PLAY to resume dubbing. |
|
|
| END AUDIO DUBBING |
| Press STOP to stop the tape in your VCR, and engage |
6 the audio component's Stop mode. |