E
N
25
Set DBS Receiver Brand
CH |
8 |
1
TURN ON DBS RECEIVER
Select a channel other than channel 55, 100 or 205 on your DBS receiver.
ACCESS DBS RECEIVER BRAND SET SCREEN
2
At the Function Set 3 screen, press CH5° or TIME SCAN 5° to place the arrow next to “DBS
RECEIVER BRAND SET”, then press OK.
FUNCTION 3 OVERRIDE
AUTO CLOCK SET
LANGUAGE SELECT
VCR PLUS+
=DBS RECEIVER BRAND SET
JLIP ID NO. SET
PRESS (5,°), THEN (OK)
PRESS (MENU) TO END
1 | 2 | 3 |
ENTER DBS RECEIVER BRAND
NUMBER | 4 | 5 | 6 |
|
|
| |
| 7 | 8 | 9 |
|
| 0 |
|
CH
3
Press the appropriate NUMBER keys to enter the DBS Receiver Code from the following list, then press OK.
The unit is
DBS RECEIVER BRAND SET
80
PRESS NUMBER KEY
PRESS (MENU) TO END
OK
MENU
TIME SCAN
NOTES:
●Depending on the type of DBS receiver, it is possible that the Controller will not work with it.
●If your DBS receiver doesn’t respond to the code, you can’t use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start of timer recording.
●The VCR can only change the satellite channel through the Controller during timer recording.
●If your DBS receiver is one that can’t be operated with a remote control (has no remote sensor), you can’t use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start of timer recording.
●For customers in U.S.A.: If you are unable to set the Control- ler, please contact JVC toll free at
4
●If the DBS receiver's
channel changes as follows, setting is complete: RCA or SONY [ 205
PRIMESTAR [ 55 ECHOSTAR [ 100
●After OK is pressed, the program currently received through the DBS receiver will appear for about 10 seconds.
BRAND | CODE |
RCA (DSS) | 80 |
SONY (DSS) | 81 |
PRIMESTAR | 90 |
ECHOSTAR | 91 |
|
|
|
|
