D.S.T. SELECT
=AUTO
ON
OFF
PRESS (5,°) TO SELECT
PRESS (MENU) TO END

EN11

CH

9

8

MENU

OK

SELECT D.S.T. MODE

You have three choices: a–Select “AUTO” and the adjustment to your VCR’s clock will be made according to the incoming signal from the host channel.

b–Select “ON” and the adjustment will be made based on the clock itself.

c–Select “OFF” if Daylight Saving Time doesn’t apply to you.

Place the arrow next to your choice by pressing CHor TIME SCAN , then press MENU and the Semi- Auto Clock Set screen reappears.

 

1

2

3

NUMBER

4

5

6

 

 

 

 

7

8

9

 

 

0

 

CH

OK

MENU

TIME SCAN

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

Auto

5

 

SELECT MODE

°

 

 

At the Override Auto Clock Set screen, place the arrow

 

 

next to "AUTO CLOCK SET" by pressing CH▲▼ or

 

TIME SCAN 5 , then power off the VCR. Do not

 

 

power it on again until the clock has been adjusted.

 

 

The clock is automatically adjusted on the hour except

 

 

at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The

 

 

clock will be adjusted on the hour based on the time

 

 

displayed on the VCR, not on the actual real time.)

 

 

 

IMPORTANT

Turn the VCR off after performing the Semi-Auto Clock Set procedure. "Auto" will appear on the front display panel when the clock is being set. The current time will appear automatically when the clock is set.

Manual

5

SELECT MODE

°

 

At the Override Auto Clock Set screen (pg. 10), place

 

the arrow next to “MANUAL CLOCK SET” by pressing

 

CH▲▼ or TIME SCAN 5 , then press OK.

SET DATE, TIME AND D.S.T.

The Manual Clock Set

MANUAL CLOCK SET

screen is displayed and the

 

 

6 month digit begins blinking.

DATE

1/ 1/97 WED

TIME

:– – AM

Press the appropriate

D.S.T.

ON

NUMBER keys to set the

 

 

date and time (if only 1

PRESS NUMBER KEY(0-9)

digit, press "0" first). Press

OR (5,°), THEN (OK)

CH▲▼ or TIME SCAN

PRESS (MENU) TO END

to set AM/PM and D.S.T.

 

 

(Daylight Saving Time). Press OK after AM/PM and D.S.T.

settings.

 

 

Set D.S.T. to "ON" to set the D.S.T. according to the

VCR's clock or to "OFF" if D.S.T. doesn't apply to you.

When you’re finished with this set-up procedure, press MENU to start the clock.

NOTE:

CHand TIME SCAN can be used to perform all operations. (In this case, press OK after each setting.)

MAKE CORRECTIONS

7 To change any of the settings, press OK or TIME SCAN ª £ until the item you want to change blinks, then set as in step 6.

Page 11
Image 11
JVC HR-S9400U manual Select D.S.T. Mode, Select Mode, SET DATE, Time and D.S.T, Make Corrections