JVC HR-S9400U manual SET Program Information

CH

8

5

MENU				OK
	1	2	3
NUMBER	4	5	6
				NUMBER "9"
	7	8	9
		0		TIMER
				CH

OK

MENU

TIME SCAN

EXAMPLE
If you program the VCR to timer	PROGRAM 1
record a show on December 24
	DATE	12/24 WED
on channel 100 from 12:00
noon to 1:00 PM in SP mode,	START	12:00 PM
	STOP	1:00 PM
the screen will look like this:	CHANNEL	100 SP DBS
● "DBS" will be displayed only	PRESS NUMBER KEY(0-9)		6
when you are using a DBS	OR (5,°), THEN (OK)
receiver.	PRESS (MENU) TO END
NOTES:
● To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
● In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 20 hours.
● If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.
● If you enter a start time that has already passed, "ERROR"			7
appears on the screen and flashes.
● Programs that start after midnight must have the next day’s date.
● After timer recording is completed, the VCR’s power goes off
automatically.
● You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
● If the end of tape is reached during timer recording, the
cassette is automatically ejected.			8
● When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.

EN49

SET PROGRAM

INFORMATION

Press the appropriate NUMBER keys to set the date, start/stop time and channel number. Press CH5° or TIME SCAN 5° to set AM/PM and tape speed (SP or EP). Press OK after AM/PM, channel number and tape speed settings.

●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.

●It is possible to set all information using the CH5° or TIME SCAN 5° button. (In this case, press OK after each setting.) Do not use the CH ° or TIME SCAN ° button to set the date.

●The item that can be set blinks.

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0 – 9), TIME SCAN, CANCEL and MENU.

NOTES:

●To timer-record a program received with a cable box or DBS receiver, directly enter the channel that the cable box or the DBS receiver receives it on.

●If you are using a DBS receiver of RCA or SONY or ECHOSTAR, when one of the channels between 100 and 999 is entered, the VCR recognizes it as a satellite channel and shows "DBS" on screen next to the tape speed indication. To timer-record a cable channel between 100 and 199, be sure to set "DBS RECEIVER OUTPUT" to "OFF" (☞ pg.24).

●If you are using a PRIMESTAR DBS receiver, the VCR recognizes any entered channel as a satellite channel and shows "DBS" on screen next to the tape speed indication. To timer-record a cable or regular channel, be sure to set "DBS RECEIVER OUTPUT" to "OFF" (☞ pg.24).

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears. For weekly recording, the desired date for the day of the week must be entered.

MAKE CORRECTIONS

To change any of the settings, press OK or TIME SCAN

ª£until the item you want to change begins blinking. Then set as in step 5.

●If you are using the Illumi-Guide feature, OK blinks when the following buttons are lit: NUMBER keys (0 – 9), TIME SCAN, CANCEL and MENU.

RETURN TO NORMAL

SCREEN

Press MENU as many times as necessary.

●Press just once to access the Auto Timer screen (☞ pg. 51).

●If you are using the Illumi-Guide feature, all buttons go out.

ENGAGE TIMER MODE

Press TIMER. The VCR turns off automatically.