62
EN
| SPECIAL FEATURES (cont.) |
| DBS Receiver |
| Remote Control |
POWER | The VCR's remote control can control functions on the brands |
| of DBS (Direct Broadcast Satellite) receivers listed below. |
| 1 | 2 | 3 | ENTER |
| 4 | 5 | 6 | |
NUMBER |
| |||
|
|
|
| |
| 7 | 8 | 9 |
|
|
| 0 |
|
|
|
|
|
| CH |
|
|
|
| TV/CABLE/DBS/VCR |
|
| STOP |
|
|
(Ex.) To set remote control to RCA 80:
POWER |
| STOP |
| |
8 | 0 | Release | ||
| ||||
Hold | Press in succession |
|
| |
down |
|
|
|
|
|
| TURN ON THE DBS |
| 1 |
| RECEIVER |
|
| Turn the power on using the DBS receiver’s remote | |
|
| control. | |
|
|
| SET REMOTE CONTROL |
| 2 |
| MODE |
|
| Set the TV/CABLE/DBS/VCR switch on the VCR’s | |
|
| remote control to CABLE/DBS. | |
| 3 |
| ENTER DBS RECEIVER BRAND |
|
| While holding down POWER on the VCR's remote | |
|
| control, use the NUMBER keys to enter the DBS receiver | |
| brand number from the chart below and then press STOP. | ||
|
|
| Follow the example shown at bottom left. |
|
|
|
|
|
|
| ● Once you have set the remote control to operate the |
|
|
| DBS receiver, you don't have to repeat this step until |
|
|
| you replace the remote control's batteries. |
|
|
|
|
| 4 |
| OPERATE DBS RECEIVER |
|
| First, press POWER to see if the DBS receiver’s power | |
|
| goes off as it should. If it does, try other functions | |
|
| (CH5° and the NUMBER keys can be used to operate | |
|
|
| the DBS receiver). |
|
|
|
|
|
|
| ● For some brands of DBS receiver, you must press |
|
|
| ENTER after having pressed the NUMBER keys. |
|
|
| ● To return the remote to VCR control, set the TV/ |
|
|
| CABLE/DBS/VCR switch to VCR. |
NOTES:
●You must set the DBS receiver brand for your remote control and the DBS receiver brand for your Controller (☞ pg. 25) separately.
●It is possible that the remote control will not operate your DBS receiver even if the DBS receiver’s channels automatically change during timer recording using the Controller.
●Though ECHOSTAR has a number of different remote codes, this remote control is applicable only to one of those codes preset at the factory.
●It's not possible to set the remote control for both your cable box and your DBS receiver at the same time; you can only set the remote control to the brand of either one.
DBS BRAND NAME | BRAND CODE |
|
|
RCA (DSS) | 80 |
SONY (DSS) | 81 |
PRIMESTAR | 90 |
ECHOSTAR | 91 |
|
|
