EN7

 

Antenna or Cable

 

Coaxial Cable

 

Flat Feeder

 

ANTENNA-IN

 

(Antenna or Cable input)

 

Matching Transformer

AC Power Cord

(Not supplied)

 

Back of VCR

AC Outlet

S VIDEO

TV OUT

OUT

 

Audio/Video

Cable (supplied)

S-Video Cable

RF Cable

(supplied)

(supplied)

TV

S VIDEO IN

75 ohm terminal

NOTES:

To make the most of the Super VHS picture performance we recommend that you use the supplied S-VIDEO cable to connect your VCR to a TV with an S-VIDEO input connector.

To operate the VCR with your TV using the S-VIDEO connec- tion, set your TV to the AV mode using the TV's remote control.

You can also use the TV/VCR button on the VCR's remote control to set your TV to the AV mode. (pg. 60)

S-VIDEO Connection

CONNECT VCR TO TV

a– Connect both the RF cable and the AV cables to the TV as explained in step 3 of "Basic Connections" (pg. 6).

b– Connect the S-Video cable between the S-VIDEO OUT jack on the rear of the VCR and the S-VIDEO IN jack on the TV.

Page 7
Image 7
JVC HR-S9400U manual Antenna or Cable, AC Power Cord Not supplied, AC Outlet, Audio/Video Cable supplied RF Cable Supplied