Specifications
Temperature | 32° to 104° F (0° to 40° C) | This unit is intended for indoor use | |
Operating | only. Select a location sturdy enough | ||
Storage | 5° to 86° F | to handle the weight. | |
| 86° to 113° F (30° to 45° C) charge the UPS battery every three months | Do not operate the UPS where there | |
| is excessive dust or the temperature | ||
Maximum |
| or humidity are outside the specified | |
| limits. | ||
Elevation |
| ||
| Environmental factors impact battery | ||
Operating | 6562 ft (2,000 m) | ||
life. High temperatures, poor utility | |||
Storage | 50,000 ft (15,240 m) | power, and frequent, short duration | |
|
| discharges will shorten battery life. | |
|
|
| |
Humidity | 0 to 95% relative humidity, |
| |
|
|
| |
Weight | 215 lbs (98 kg) with battery module | 215 lbs (98 kg) | |
| 107 lbs (49 kg) without battery module |
| |
| 27 lbs (12 kg) each battery module |
| |
|
|
|
NOTE: The model and serial numbers are located on a small, rear panel label. For some models, an additional label is located on the chassis under the front bezel.
Installation
Rack-mount configuration
This unit is intended for mounting in a four post rack. To order a two post
The UPS and the battery modules are heavy. Remove the battery modules to lighten the UPS during installation. Refer to the battery removal instructions on the packaging.
Install rack-mount brackets and rail cleats
Four screws must be used to secure each rail bracket and rail cleat to the UPS. One
four post
Rail cleat
4x
4x
2 |