American Power Conversion 5000VA user manual Feature Feature Title Function Button

Page 15

Indicator

Indicator Title

 

 

Description

LED

 

 

 

 

 

 

230 V 208 V

Diagnostic

The UPS has a diagnostic feature that indicates the utility voltage.

Utility Voltage

The UPS starts a self-test as part of this procedure. The self-test does not affect the

 

 

 

voltage display.

 

 

 

 

Press and hold the

button to view the utility voltage bar graph indicator. As

Battery

 

soon as the on-line LED starts flashing indicating a self-test is in progress, the five-

Charge

 

LED Battery Charge indicator will show the utility input voltage.

 

 

Refer to the figure on the left for the voltage reading.

 

 

Values are not listed on the UPS.

 

 

 

The indicator on the UPS shows the voltage is between the displayed value on the

 

 

list and the next higher value, (see Troubleshooting).

Feature

Feature Title

 

 

Function

Button

 

 

 

 

 

 

 

Power On

Press this button to turn on the UPS. Continue reading for additional

 

 

capabilities.

 

 

 

Self-Test

Automatic: The UPS performs a self-test automatically when tuned on, and

 

 

every two weeks thereafter (by default). During the self-test, the UPS

 

 

briefly operates the connected equipment on battery.

 

 

Manual: Press and hold the

button for a few seconds to initiate the

 

 

self-test.

 

 

 

Cold Start

When there is no utility power and the UPS is off, the cold start feature will

 

 

switch the UPS and connected equipment onto battery power,

 

 

(see Troubleshooting).

 

 

Power Off

Press this button to turn off the UPS.

Smart-UPS 5000 VA 208/230 Vac Tower/Rack-Mount 5U User Manual

11

Image 15
Contents APC Smart-UPS→ Page Contents Page Read the Safety Guide before installing the UPS About this UPSUnpack Install rack-mount brackets and rail cleats SpecificationsInstallation Rack-mount configurationInstall unit in rack Rack-mount to tower conversion procedure Install stabilizer bracketsInstall two top covers Input hardwire 230 V models only AccessoriesConnect the ground wire prior to connecting the line wires Configure bezel Rack-mount configuration Tower configurationConnect batteries Rack-mount configuration Connect display cable and install bezelConnect Equipment and Power to the UPS Rear PanelsStart the UPS Communication Ports Emergency Power OffModels Display Panel Indicators and Function ButtonsIndicator Indicator Title Description Display PanelsFeature Feature Title Function Button Function Factory User Selectable Description Default Choices UPS settingsBrightly Problem and/or Possible Cause Solution TroubleshootingReplace Battery/Battery Disconnected LED is illuminated There is no utility power Maintenance, Transport, and Service Replace battery modulesInstall new batteries Service Terms of warranty Two-Year WarrantyFCC Compliance Notice Models Regulatory InformationDate of product declaration