Rack-mount to tower conversion procedure
The UPS and the battery modules are heavy. Remove the battery modules to lighten the UPS during installation. Refer to the battery removal instructions on the packaging.
Install stabilizer brackets
Stand the UPS on the side with the embossed marks.
Secure a stabilizer bracket (supplied), to both sides of the UPS.
Secure each bracket with two pan head locking screws (supplied).
4x
Install two top covers
Install the large top cover by placing it in the slots on the UPS and sliding the cover forward.
Install the small top cover by placing it in the slots on the UPS and sliding the cover forward.
Secure the top covers with a #8 black screw (supplied).
Install batteries
Connect only the first two batteries in the string of three batteries. Be sure that the battery connectors are fully engages.
Do not connect the single battery or the last battery installed in the string of three batteries.
Close and secure the battery doors
2x
Foam spacers
2x
4 |