APC SMX 1500 VA, SMX48RMBP2U, SMX750 VA, SMX1000 VA operation manual Network Management Card Settings

Page 14

Network Management Card Settings

These settings are available only on units that have a Network Management Card (NMC) and are set in the factory. These settings can only be modified using an external interface, like the NMC web interface.

•NMC IP Address Mode

•NMC IP Address

•NMC Subnet Mask

•NMC Default Gateway

12	Smart-UPS X 750/1000/1500 VA 120/230 Vac Rack-Mount 2U

Image 14

Contents Smart-UPS X Uninterruptible Power Supply Page Product Description Important Safety MessagesSafety and General Information Product Overview Front Panel FeaturesRear Panel Features 120 VacEnvironmental Specifications SpecificationsInstallation Network Management Card External Battery PackConnect Equipment to the UPS Basic ConnectorsOperation Overview Using the display interfaceDisplay Panel Standard menusLog Advanced menusControl Start up settings ConfigurationUPS Settings General SettingsControllable Outlet Groups 1000 VA 120/230 Vac Model specific controllable outlet groups 750 VA 120 Vac 1500 VA 120/230 VacUsing the controllable outlet groups and UPS outlets Reboot Duration Turn On DelayTurn Off Delay On BatteryNetwork Management Card Settings Normally closed contacts Emergency Power OffNormally open contacts UPS is emits intermittent beeps TroubleshootingUPS does not provide expected backup time Display interface LEDs flash sequentiallyReplace Battery LED is illuminated UPS displays a site wiring fault messageService Transport the unitTwo Year Limited Factory Warranty Non-transferable warrantyPage APC by Schneider Electric Worldwide Customer Support 990-3458B 04/2013