APC SMX750 VA, SMX48RMBP2U, SMX 1500 VA, SMX1000 VA Installation, Environmental Specifications

Page 5

Specifications

Environmental Specifications

For additional specifications, refer to the APC by Schneider Electric Web site at www.apc.com.

Temperature	Operating	0° to 40° C (32° to 104° F)
	Storage	-15° to 45° C (5° to 113° F)
	Storage	charge UPS battery every six months
		charge UPS battery every six months

Maximum	Operating	3,000 m (10,000 ft)
Elevation	Storage	15,000 m (50,000 ft)
	Storage	15,000 m (50,000 ft)

Humidity	0% to 95% relative humidity, non-condensing

Installation

UPS

For UPS installation information, refer to the Smart-UPS X Installation Guide that is included with the UPS. The guide is also available on the enclosed CD and the APC by Schneider Electric Web site at www.apc.com.

Network Management Card

For installation information, refer to the user manual provided with the Network Management Card (NMC). The user manual is also available on the APC by Schneider Electric Web site at www.apc.com.

External Battery Pack

For installation information, refer to the SMX48RMBP2U external battery pack Installation Guide that is included with the external battery pack (XLBP). The guide is also available on the enclosed CD and the APC by Schneider Electric Web site at www.apc.com.

Smart-UPS X 750/1000/1500 VA 120/230 Vac Rack-Mount 2U

3

Image 5

Contents Smart-UPS X Uninterruptible Power Supply Page Product Description Important Safety MessagesSafety and General Information Rear Panel Features Front Panel FeaturesProduct Overview 120 VacInstallation SpecificationsEnvironmental Specifications Network Management Card External Battery PackConnect Equipment to the UPS Basic ConnectorsOperation Display Panel Using the display interfaceOverview Standard menusLog Advanced menusControl UPS Settings ConfigurationStart up settings General SettingsControllable Outlet Groups 750 VA 120 Vac Model specific controllable outlet groups1000 VA 120/230 Vac 1500 VA 120/230 VacUsing the controllable outlet groups and UPS outlets Turn Off Delay Turn On DelayReboot Duration On BatteryNetwork Management Card Settings Normally closed contacts Emergency Power OffNormally open contacts UPS does not provide expected backup time TroubleshootingUPS is emits intermittent beeps Display interface LEDs flash sequentiallyUPS displays a site wiring fault message Replace Battery LED is illuminatedTransport the unit ServiceNon-transferable warranty Two Year Limited Factory WarrantyPage 990-3458B 04/2013 APC by Schneider Electric Worldwide Customer Support