Safety warnings

Safety

SAVE THESE INSTRUCTIONS

This manual contains important instructions for the Smart-UPS®VT and MGE™ Galaxy™ 3500 series that should be followed when handling the Maintenance Bypass Panel with Power Distribution (wall- mount).

This UL-listed unit was designed to operate in conjunction with the Smart-UPS VT and MGE Galaxy 3500 10-30kVA, 208V UPS.

Warning: Only APC by Schneider -trained personnel who are familiar with the construction and operation of this equipment, as well as the mechanical and electrical hazards involved, may perform this installation.

Warning: This installation must comply with the requirements of ANSI/NFPA 75 and NEC/NFPA 79 Art. 645.

Warning: All safety codes, safety standards, and other regulations must be strictly observed during installation and ongoing maintenance of this equipment.

Warning: Prior to installing the Smart-UPS VT or MGE Galaxy 3500 Maintenance Bypass Panel, de-energize all external power being supplied to the UPS!

Warning: Ensure that no electrical power is connected to the Maintenance Bypass Panel, and that all switches are in the OFF position before installing or servicing this unit!

Warning: All wiring instructions must be followed precisely. Failure to comply could result in permanent damage to the equipment!

Warning: When installing this unit to a wall, avoid contact with previously installed electrical wires and other potential hazards that might be embedded in the wall!

Smart-UPS® VT and MGE™ Galaxy™ 3500 10-30 kVA 208 V MBP Installation