3600 SERIES USER MANUAL
2.3.6.3 Enable/disable the rotary knob
When you select the ROTARY SW SET function, the LCD will display as:
SW ENABLE (Def)
SW DISABLE
You can select SW ENABLE (Def) to enble the rotary switch or select SW DISABLE to disble it .
2.3.6.4 Set up initial output state
When you select the INITIAL OUT SET function, the LCD will display as:
INI. OUT SAVE
INI. CLEAR (Def)
2.3.6.5 Save voltage setting
Select INI. OUT SAVE to save the output data before switching off the unit, select INI. CLEAR (Def) to clear the output data before switching off the unit.
When you select VOLT. SAVE SET function, the LCD will display as:
SAVE OUT VOLT
DON’T SAVE (Def)
Select SAVE OUT VOLT. to save the last output volt- age before switching off the unit, select "DON’T SAVE (Def) to set the last output voltage as zero.
2.3.6.6 Set up the communication speed
This function is for monitoring the output data of the power supply by using a computer.
When you select BAUDRATE SET function, the LCD will display as:
BAUDRATE=4800
BAUDRATE=9600
BAUDRATE=19200
BAUDRATE=38400
Users can change the communication setup by using UP and DOWN keys or rotating the ROTARY knob, and confirm the value by pressing “Enter” button.
BAUDRATE 4800 represents BAUDRATE=4800bps
BAUDRATE 9600 represents BAUDRATE=9600bps
BAUDRATE 19200 represents BAUDRATE=19200bps
BAUDRATE 38400 represents BAUDRATE=38400bps
3600 Series Programmable Power Supply
14 | VERSION 2.0 2004.6 |
|