3Com 3644A, 3646A COM Port and address set, COM Port Failure Opening frame, Power Address Set

Page 22

3600 SERIES USER MANUAL

Fig 4-2 System Prompt the restart

4.2 The COM Port and Lower Machine (Power Supply) Address Set

Login in the identity of “Manager” and then select the quick icon after the system restarts. The dialogue frame as shown in Fig.4-3 will be displayed.

Fig 4-3 COM Port and address set

In Fig. 4-3, select the COM port from the pull-down table. If the COM port does not exit, the system will prompt the diagram as shown in Fig. 4-4. And click the “OK” button and the page key “ADDRESS” are out of work. And vice versa. (And users must be in the identity of the “Manager” otherwise the “ADDRESS” cannot be used.

Fig 4-4 COM Port Failure Opening frame

Set Default POWER Address:

The system will automatically be in the networking state after the start according to the default COM port and the default POWER. It is just needed to enter the address in the “Default POWER” bar.

Set POWER Address:

Login in the identity of the “Manager” and select the existing COM port. Then the “ADDRESS” page key will be available.

Fig 4-5 POWER Address Set

3600 Series Programmable Power Supply

20	VERSION 2.0 2004.6

Image 22

Contents Page Series Series Programmable Power Supply Version 2.0 Safety II. Connecting the power lineIV. Power supply III.FuseProgram resolution Specification ModelPowermax Readback resolutionFeatures WeightDimensions ProtectionFront view of 3600 Series DC power supply LCD Display of 3600 Series PowersupplyStructure Front view Rotary knob and function keys Back view Sub-functions General operationOperation of the function Set up voltage To set up by using Rotary knobSet up current Enable/disable the outputStore parameters SaveRecall parameters Function of the MenuSet up the maximum output voltage Set up the maximum output powerSave voltage setting Enable/disable the rotary knobSet up initial output state Set up the communication speedClear saved parameters Set up communication address 0~31Lock the keypad ExitInstallation Initial Interface System InstallationInstallation Interface Installation Interface System Start System Start Interface10 The PowerMS Main Interface Explanation System Start DiagramSystem Uninstallation Power Definition Interface Parameter ExplanationCOM Port and address set Power Address SetCOM Port Failure Opening frame Start the Communication Selecting the PowerCommunication Failure Normal Communication10-1 Select the Control Instruction Select PC to Power Control Instructions11 Using the Rotary knobFig 4-12 Using the Keypad 10-2 Selecting Control Instruction Set the Voltage Range15 Query the Report Query the Report16 Delete the History Data Explanation of the Interface Indicating Components Voltage Running Diagram18 Keypad Explanation State Bar Current Running Diagram 17 Instrument IndicationPower Supply State Indication Exit the System