3Com 3646A, 3644A System Installation, Installation Initial Interface, Installation Interface

Page 18

3600 SERIES USER MANUAL

Chapter 3 System Installation of PowerMS Software

3.1 System Installation

3.1.1Put the disk into the CDROM driver. Then select the setup powerMS and the initial diagram as in Fig. 3-1 will be displayed.

Fig 3-1 The Installation Initial Interface

3.1.2 Then it will enter the interface as in Fig. 3-2. Press “NEXT” to continue.

Fig 3-2 The Installation Interface 2

3.1.3In Fig. 1-3, there is some explanation to some products’ introduction. Read it and press “YES” to continue, otherwise there will be no way to install.

Fig 3-3 The Installation Interface 3

3.1.4In Fig. 3-4, click “BROWSE” to select installation directory path. The default directory path is “C: \Program Files\Array\PowerMS”

Fig 3-4 The installation Interface 4

3600 Series Programmable Power Supply

16	VERSION 2.0 2004.6

Image 18

Contents Page Series Series Programmable Power Supply Version 2.0 Safety II. Connecting the power lineIV. Power supply III.FuseProgram resolution Specification ModelPowermax Readback resolutionFeatures WeightDimensions ProtectionLCD Display of 3600 Series Powersupply Front view of 3600 Series DC power supplyStructure Front view Rotary knob and function keys Back view General operation Sub-functionsOperation of the function Set up voltage To set up by using Rotary knobSet up current Enable/disable the outputStore parameters SaveRecall parameters Function of the MenuSet up the maximum output voltage Set up the maximum output powerSave voltage setting Enable/disable the rotary knobSet up initial output state Set up the communication speedClear saved parameters Set up communication address 0~31Lock the keypad ExitSystem Installation Installation Initial InterfaceInstallation Interface Installation Interface System Start System Start InterfaceSystem Start Diagram 10 The PowerMS Main Interface ExplanationSystem Uninstallation Power Definition Interface Parameter ExplanationPower Address Set COM Port and address setCOM Port Failure Opening frame Start the Communication Selecting the PowerCommunication Failure Normal Communication10-1 Select the Control Instruction Select PC to Power Control Instructions11 Using the Rotary knobFig 4-12 Using the Keypad 10-2 Selecting Control Instruction Set the Voltage RangeQuery the Report 15 Query the Report16 Delete the History Data Explanation of the Interface Indicating Components Voltage Running Diagram18 Keypad Explanation State Bar Current Running Diagram 17 Instrument IndicationPower Supply State Indication Exit the System