3Com 3645A, 3646A, 3644A Explanation of the Interface Indicating Components, Instrument Indication

Page 26

3600 SERIES USER MANUAL

Explanation: The data range condition must be set.

7.) Close: Select “CLOSE” and return to the upper-interface.

4.10Explanation of the Interface Indicating Components

1.) Instrument Part

The Voltage Value (Accuracy rate: 2 digits)

Fig 4-17 Instrument Indication

Voltage Set Value (Accuracy rate: 5 digits)

Common Data: Green

Overflowing Data: Red

Common Date and Overflowing Data are both in the normal communication state. 2.) Running Curve: Indicates the data acquired at the nearest 10 ports.

The Voltage Running Diagram

3.) Keypad Explanation

Fig 4-18 Keypad Explanation

4.11 The State Bar

The Current Running Diagram

Number Keys: 0-9	“.”: the point key
“C”: the cleared key	“		”: the backspace key

“V”: the voltage setting key (Unit: V)

“A”: the current setting key (Unit: A)

“mV”: the voltage setting key (Unit: mV )

“mA”: the current setting key (Unit: mA)

“Vmax”: input the max voltage value (36V)

“Amax”: input the max current value (3A)

“OK”: the confirmation key Panel Part:

V:presents the current voltage set state (Unit: V). Max 36: presents that the max set voltage value is 36. 0: the current set value

Power: p3: represents the current selected POWER.

3600 Series Programmable Power Supply

24	VERSION 2.0 2004.6

Image 26

Contents Page Series Series Programmable Power Supply Version 2.0 Safety II. Connecting the power lineIV. Power supply III.FuseProgram resolution Specification ModelPowermax Readback resolutionFeatures WeightDimensions ProtectionStructure Front view LCD Display of 3600 Series PowersupplyFront view of 3600 Series DC power supply Rotary knob and function keys Back view Operation of the function General operationSub-functions Set up voltage To set up by using Rotary knobSet up current Enable/disable the outputStore parameters SaveRecall parameters Function of the MenuSet up the maximum output voltage Set up the maximum output powerSave voltage setting Enable/disable the rotary knobSet up initial output state Set up the communication speedClear saved parameters Set up communication address 0~31Lock the keypad ExitInstallation Interface System InstallationInstallation Initial Interface Installation Interface System Start System Start InterfaceSystem Uninstallation System Start Diagram10 The PowerMS Main Interface Explanation Power Definition Interface Parameter ExplanationCOM Port Failure Opening frame Power Address SetCOM Port and address set Start the Communication Selecting the PowerCommunication Failure Normal Communication10-1 Select the Control Instruction Select PC to Power Control Instructions11 Using the Rotary knobFig 4-12 Using the Keypad 10-2 Selecting Control Instruction Set the Voltage Range16 Delete the History Data Query the Report15 Query the Report Explanation of the Interface Indicating Components Voltage Running Diagram18 Keypad Explanation State Bar Current Running Diagram 17 Instrument IndicationPower Supply State Indication Exit the System