
3600 SERIES USER MANUAL
2.3.6.7 Set up communication address (0~31)
This communication address function is for monitoring
When you select ADDRESS SET function, the LCD will display as:
SET ADDRESS =12
NEW=
2.3.6.8 Lock the keypad
Users can change the communication address by us- ing number kaypad or rotating the ROTARY knob, and confirm the value by pressing “Enter” button. The range of the address is from 0 to 31.
After you locked the keypad, you must enter the correct password to unlock it, then you can use the number keys and the ROTARY knob. This function is for the safety of the using of power supply.
When you select the KEY LOCK function, the LCD will display as:
ENTER PASSWORD
Users can enter 4 numbers or letters as the password by pressing the number button or by using ROTARY knob to and
keys to change the number or ASCII number which will be your password, and confirm the password by pressing “Enter” button.
2.3.6.9 Clear saved parameters
When you select CLEAR SAVE DATA function, the LCD will display as:
CLEAR *
“*” refers to the serial number of the saved parameters.
2.3.6.10 Exit
Select “Exit” to exit the menu.
3600 Series Programmable Power Supply
VERSION 2.0 2004.6 | 15 |
|