Making a BAG with the Roll

Supreme Vacuum Sealer

1.The Bag Cutter must be positioned at either end of the cutter slide slot before cutting.

2.Open the rear lid and place bag roll into Roll Storage Compartment.

3.Pull the bag material out of the Roll Storage to the suitable length you want (Pull out enough of the bag roll to hold items to be vacuum packed plus an additional 3”. Allow another 1” for each time the bag will be opened & resealed.) then close the rear lid.

4.Press and slide Bag Cutter from one side to the end with your hand stressing the bag steadily to achieve a better effect.

5.Open the lid and place either open end of bag material on Sealing Strip, close it. Press down on the lid until two click sounds are heard.

6.Press the “Seal Only” Button to start sealing.

7.When the Seal Indicator Light turns off, sealing is completed. Press both unlock buttons.

8.Open the upper lid and take out the bag.

9.Now the bag is ready, you can vacuum package with it.

Note: Your appliance can not work with bag rolls wider than 111/2 inches.

VACUUM PACKAGING YOUR FILLED BAG:

1.Put the items inside the bag.

2.Open the lid, clean and straighten the open end of the bag, make sure no wrinkle or ripples.

3.Place the open end of the bag in the vacuum chamber beneath the air intake.

4.Close the lid and then press heavily on both sides of the lid until two click sounds heard.

5.Press the “Vacuum/Seal” Button. The bag will be automatically vacuumed and sealed.

6.When the Indicator Lights of “Seal Only” and “Seal/Vacuum” turn off, the process is completed. Press the two Unlock Buttons, lift lid and remove the bag.

7.Refrigerate or freeze if needed.

NOTE: For best sealing effect, it is better to let the appliance cool down for 1 minute before using it again. Wipe out any excess liquid or food residue on Removable Interface after each bag package.