GBC 930-115 manual Applications, Film loading and threading

Page 27

Operations Manual

Polaris II

 

 

6.0 Applications

Figure 6.1.1 Suction Cup Control

The Polaris will accommodate rolls of film on a 3 inch core. This section will describe how to load and thread film and start an application. This section will also give some helpful hints and important points to remember.

WARNING: Do not wear ties, loose fitting clothes or dangling jewelry while operating or servicing the laminator. These items may get caught in the nip and choke you or you can be crushed or burned.

O F F

O N

S U C T IO N C U P S

6.1 Film loading and threading

Figure 6.1.2 Suction Cups and Paper Pile

(1)Turn power ON.

S U C T I O N C O N T R O L S

(2)Slide the roll of laminating film onto the unwind shaft so the adhesive is facing away from the heat roller when placed on the laminator.

CAUTION: The dull side of the film contains the adhesive. Use extreme caution when loading delustered (matte) film as both sides appear dull.

(3)Load the sheet stack on the feed table. Make sure to “fan” the paper when loading to ensure proper feeding. Left justify the paper and adjust paper guides as required.

(4)Adjust suction cups on the feeder so that only the suction cups needed are being used. To adjust, turn off the first suction cup that does not come in contact with the paper stack. See Figures 6.1.1 and 6.1.2

P A P E R P I L E

(5)Adjust suction cup pressure and blower pressure. As a starting point, the blower should be set at 20 Kpa and the suction should be set to -40 Kpa. This may have to be adjusted for different applications.

(6)Select paper length on main control panel.

(7)Select Nip Pressure on main control panel. See “Application Guide” for settings.

(8)The Polaris is left justified and the film should be lined up from the left to the right. Once the film is mounted, secure in place by tightening the screws on the locking collars.

© 2004 General Binding Corporation

Page 6-1

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Polaris II Laminator Operator Manual Page Table of contents Applications Maintenance and TroubleshootingSafety Explanation of symbolsGeneral rules of safety Operations Manual Hot rollers LabelsSharp knife 1 Safety label placement Polaris Operations Manual Warranty This page intentionally left blank Specifications Ch es 50 .5 in ch es Pre-installation Installation1 Paper Guide Setting up your laminatorComponents on the laminator Operation3 Catch Table 7 Heat Roller and Shield 9 Paper Pin Refer to .2.1 Control panel Control panel1 Control panel Speed Screen Operator ScreensIL E Film Tension Separator KnifeSupply Shaft Film Alignment1 Manual Tension Knob Film loading and threading Applications3 Film Leader Helpful hints Important points to rememberPolaris Operations Manual Quick Setup HiTac Films For Digital Printers Maintenance & Troubleshooting Clean the rollersCabinets and cover Troubleshooting Misc maintenance1 Troubleshooting guide Symptom Solution Polaris Operations Manual

930-115 specifications

The GBC 930-115 is a state-of-the-art industrial-grade machine designed primarily for the specialized needs of laminating and finishing applications. Known for its robust performance and exceptional efficiency, the GBC 930-115 has become a preferred choice for businesses looking for high-quality lamination solutions.

One of the main features of the GBC 930-115 is its versatile lamination capabilities. The machine accommodates a wide range of media types and sizes, making it ideal for both small print shops and large production environments. With its ability to laminate print materials up to 13 inches in width, it allows users to process various documents such as flyers, posters, and photos with laser precision.

Equipped with advanced technologies, the GBC 930-115 boasts an intuitive control panel that simplifies operation. The user-friendly interface allows for easy adjustments to temperature and speed settings, enabling precise control over the laminating process. This feature is crucial for ensuring that materials are laminated to perfection without compromising quality.

Another notable characteristic of the GBC 930-115 is its high-speed production capabilities. The machine can reach speeds of up to 25 feet per minute, significantly improving workflow efficiency and reducing turnaround times. This is particularly beneficial for businesses with high-volume demands, as it allows for the quick processing of large batches without sacrificing quality.

The durability and construction of the GBC 930-115 further enhance its appeal. Built with a sturdy frame and high-quality components, this machine is designed to withstand the rigors of daily use in demanding environments. The reliable heating system ensures consistent temperature control, while the advanced rollers facilitate smooth feeding and lamination, eliminating issues such as jams and misalignment.

The GBC 930-115 is also designed with safety in mind. It includes automatic shut-off features that protect both the machine and its operator from potential hazards. This focus on safety ensures that users can operate the machine with confidence.

In summary, the GBC 930-115 stands out in the industry for its versatile functionality, high-speed performance, user-friendly operation, and robust construction. These features make it an invaluable asset for any business involved in laminating, ensuring high-quality results that meet both customer and industry standards.
Top Page Image Contents