GBC 930-115 manual Labels, Hot rollers

Page 7

Operations Manual

Polaris II

 

 

1.3 Labels

Safety warning labels are placed at various locations on the laminator. Do not remove any of these labels. They are placed for your safety as well as the safety of those working around you.

Below are illustrations of the safety labels and a description of their meanings.

Hot rollers

The safety labels below mean that you could be burned and your fingers and hands could be trapped and crushed in the rollers. Jewelry and long hair could be caught in the rollers and you could be pulled into them.

One of each label is placed on each side from the front operating position just in front of the heat rollers nip.

Electrical hazard

The safety label below means that you could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage.

This label is located on the rear panel in the center of the laminator just below the film supply shaft between the pull rollers and decurling bar.

-The safety label below means that you should always replace a fuse with the same size and type of fuse. This will reduce the risk of fire.

This label is located on the side cover near the fuse panel located on the rear of the machine.

Pinch point

The safety label below means use extreme caution when placing your hands in the proximity of the pull rollers nip. You should never place your fingers or other items in this area while the machine is running.

This label is located between the pull rollers and the decurling bar center of the rollers.

© 2004 General Binding Corporation

Page 1-3

Image 7
Contents Polaris II Laminator Operator Manual Page Table of contents Applications Maintenance and TroubleshootingExplanation of symbols SafetyGeneral rules of safety Operations Manual Hot rollers LabelsSharp knife 1 Safety label placement Polaris Operations Manual Warranty This page intentionally left blank Specifications Ch es 50 .5 in ch es Pre-installation Installation1 Paper Guide Setting up your laminatorComponents on the laminator Operation3 Catch Table 7 Heat Roller and Shield 9 Paper Pin Refer to .2.1 Control panel Control panel1 Control panel Speed Screen Operator ScreensIL E Film Tension Separator KnifeSupply Shaft Film Alignment1 Manual Tension Knob Film loading and threading Applications3 Film Leader Helpful hints Important points to rememberPolaris Operations Manual Quick Setup HiTac Films For Digital Printers Clean the rollers Maintenance & TroubleshootingCabinets and cover Troubleshooting Misc maintenance1 Troubleshooting guide Symptom Solution Polaris Operations Manual

930-115 specifications

The GBC 930-115 is a state-of-the-art industrial-grade machine designed primarily for the specialized needs of laminating and finishing applications. Known for its robust performance and exceptional efficiency, the GBC 930-115 has become a preferred choice for businesses looking for high-quality lamination solutions.

One of the main features of the GBC 930-115 is its versatile lamination capabilities. The machine accommodates a wide range of media types and sizes, making it ideal for both small print shops and large production environments. With its ability to laminate print materials up to 13 inches in width, it allows users to process various documents such as flyers, posters, and photos with laser precision.

Equipped with advanced technologies, the GBC 930-115 boasts an intuitive control panel that simplifies operation. The user-friendly interface allows for easy adjustments to temperature and speed settings, enabling precise control over the laminating process. This feature is crucial for ensuring that materials are laminated to perfection without compromising quality.

Another notable characteristic of the GBC 930-115 is its high-speed production capabilities. The machine can reach speeds of up to 25 feet per minute, significantly improving workflow efficiency and reducing turnaround times. This is particularly beneficial for businesses with high-volume demands, as it allows for the quick processing of large batches without sacrificing quality.

The durability and construction of the GBC 930-115 further enhance its appeal. Built with a sturdy frame and high-quality components, this machine is designed to withstand the rigors of daily use in demanding environments. The reliable heating system ensures consistent temperature control, while the advanced rollers facilitate smooth feeding and lamination, eliminating issues such as jams and misalignment.

The GBC 930-115 is also designed with safety in mind. It includes automatic shut-off features that protect both the machine and its operator from potential hazards. This focus on safety ensures that users can operate the machine with confidence.

In summary, the GBC 930-115 stands out in the industry for its versatile functionality, high-speed performance, user-friendly operation, and robust construction. These features make it an invaluable asset for any business involved in laminating, ensuring high-quality results that meet both customer and industry standards.