GBC 930-115 manual Troubleshooting guide Symptom Solution

Page 35

Operations ManualPolaris II

Figure 7.3.1 Troubleshooting guide

Symptom

Solution

Laminator won’t run.

Verify that unit is plugged in and power is present.

 

Check control panel for machine status.

 

Check fuses.

 

Feed pile light must be on.

Feeder not picking up sheets.

Check pick up heads.

 

Check suction at pick up heads.

 

Check air blast.

 

Check pile height proximity switch.

 

Insure that paper is properly stacked and fanned.

Feeder head not moving.

Check fuse.

 

Verify sheet feed eye (1st eye) is clean.

Sheets not feeding straight.

Check Pile Height pinching leading edge under tray

 

Check for uneven pressure on in-feed rollers.

 

Check side guides on table.

 

Check for obstructions on in-feed plate.

 

Check Air Blast

Sheets wrinkled.

Film tension not set properly.

 

Adhesive or paper on rollers.

 

Roller pressure uneven.

 

Crooked infeed.

 

Pull out roller pressure uneven.

Film stretching or shrinking.

Speed too slow.

 

Film tension too high.

 

Film tension too high on core chuck.

 

Binding of core chuck on shaft.

Film not sticking.

Machine not up to heat.

 

Running too fast.

 

Nip roller pressure not set properly.

 

Using incorrect film.

Excessive upward curl.

Brake or film tension set too high.

 

Decurling bar not set properly.

Excessive downward curl.

Decurling bar not set properly.

Cutter not cutting.

Cutter not in home position.

 

Check fuse.

 

Cutter and detector out of alignment with film web.

 

Film web to close too edge of paper.

 

Web running over blade.

 

Overlap too small

 

Use paper pin

Sheets not exiting the back of the machine.

Check fuse.

 

Pressure on pull out rollers not set properly.

 

Obstructions in cutter area.

 

Use exit clips.

 

Sheet not flat.

© 2004 General Binding Corporation

Page 7-3

Image 35
Contents Polaris II Laminator Operator Manual Page Table of contents Applications Maintenance and TroubleshootingGeneral rules of safety SafetyExplanation of symbols Operations Manual Hot rollers LabelsSharp knife 1 Safety label placement Polaris Operations Manual Warranty This page intentionally left blank Specifications Ch es 50 .5 in ch es Pre-installation Installation1 Paper Guide Setting up your laminatorComponents on the laminator Operation3 Catch Table 7 Heat Roller and Shield 9 Paper Pin Refer to .2.1 Control panel Control panel1 Control panel Speed Screen Operator ScreensIL E Film Tension Separator KnifeSupply Shaft Film Alignment1 Manual Tension Knob Film loading and threading Applications3 Film Leader Helpful hints Important points to rememberPolaris Operations Manual Quick Setup HiTac Films For Digital Printers Cabinets and cover Maintenance & TroubleshootingClean the rollers Troubleshooting Misc maintenance1 Troubleshooting guide Symptom Solution Polaris Operations Manual

930-115 specifications

The GBC 930-115 is a state-of-the-art industrial-grade machine designed primarily for the specialized needs of laminating and finishing applications. Known for its robust performance and exceptional efficiency, the GBC 930-115 has become a preferred choice for businesses looking for high-quality lamination solutions.

One of the main features of the GBC 930-115 is its versatile lamination capabilities. The machine accommodates a wide range of media types and sizes, making it ideal for both small print shops and large production environments. With its ability to laminate print materials up to 13 inches in width, it allows users to process various documents such as flyers, posters, and photos with laser precision.

Equipped with advanced technologies, the GBC 930-115 boasts an intuitive control panel that simplifies operation. The user-friendly interface allows for easy adjustments to temperature and speed settings, enabling precise control over the laminating process. This feature is crucial for ensuring that materials are laminated to perfection without compromising quality.

Another notable characteristic of the GBC 930-115 is its high-speed production capabilities. The machine can reach speeds of up to 25 feet per minute, significantly improving workflow efficiency and reducing turnaround times. This is particularly beneficial for businesses with high-volume demands, as it allows for the quick processing of large batches without sacrificing quality.

The durability and construction of the GBC 930-115 further enhance its appeal. Built with a sturdy frame and high-quality components, this machine is designed to withstand the rigors of daily use in demanding environments. The reliable heating system ensures consistent temperature control, while the advanced rollers facilitate smooth feeding and lamination, eliminating issues such as jams and misalignment.

The GBC 930-115 is also designed with safety in mind. It includes automatic shut-off features that protect both the machine and its operator from potential hazards. This focus on safety ensures that users can operate the machine with confidence.

In summary, the GBC 930-115 stands out in the industry for its versatile functionality, high-speed performance, user-friendly operation, and robust construction. These features make it an invaluable asset for any business involved in laminating, ensuring high-quality results that meet both customer and industry standards.