Epson R310 „ Make sure to match Panel FFC and the lateral face, Assy. with a two-sided tape

Stylus Photo R300/R310 Revision A

†External View

C.B.S 3x4 (4-6kgf•cm) Shield Plate, M/B

7.	Remove the screws (x9) which secure "Shield Plate, M/B". Then, remove
	"Shield Plate, M/B".
8.	Remove the screws (x7) which secure "Main Board". Then, remove "Main

1

C.P. 3x4 (3-5kgf•cm)

2
		C.P. 2.5x6
	8	(3-5kgf•cm)		4
	9
			7

C.B.S 3x10 (4-6kgf•cm)

3

5

6

C.B.S 3x4 (4-6kgf•cm)

Board".

† Reinstalling "Main Board"/"Shield Plate, M/B" „ Screw in the order as shown in Figure 2-16.

† Reinstalling "Housing, Support Slot Assy."
„	Match the dowels (x2) of "Housing, Support Slot Assy." and
	the positioning holes of Shield Plate, M/B".
„	Screw in the order as shown in Figure 2-15.
† Reinstalling "Panel FFC"

2

C.B.S 3x6 (4-6kgf•cm)

6

7

4

C.B.S 3x6 (4-6kgf•cm)

„ Make sure to match "Panel FFC" and the lateral face of

"Shield Plate, M/B" and then attach it to "Main Board

Assy." with a two-sided tape.

Two-sided Tape Positioning Point

3		5
	Main Board

1

Figure 2-16. Removing "Main Board" (2)

Figure 2-17. Mounting "Panel FFC"

DISASSEMBLY AND ASSEMBLY Disassembly 47