Epson R310 service manual Lubrication Point

EPSON Stylus Photo R300/R310 Revision A

4.1.3 Lubrication

†Refer to the following figures for the lubrication points.

The lubrication used for the components of Stylus Photo R300/R310 has been decided on based on evaluation carried out by Epson. As a result, the specified amount of lubricant should be applied in the places specified when carrying out repair and maintenance work.

†When wiping off the grease during the cleaning

†If necessary when performing assembly/disassembly of the printer

CAUTION „ Never use oil or grease other than those specified in this manual.

Use of different types of oil or grease may damage the components or affect the printer functions.

„ Never apply a larger amount of oil or grease than specified in this manual.

Table 4-1. Oil Applied to Stylus Photo R300/R310

Grounding Spring, PF Paper Guide, Rear

1

2

Roller, PF

<Lubrication Point>

1.Contact point between "Grounding Spring, PF" and "Roller, PF"

2.Surface of contact point between "Roller PF" and "Paper Guide, Rear"

<Lubrication Type>

1.G-26

2.G-26

<Lubrication Amount>

1.Half periphery of "Roller, PF"

2.4mm x 2 points

<Remarks>

Use a syringe to apply it

Type	Name	EPSON Code	Supplier
	G-26	1080614
Grease	G-46	1039172	EPSON
	G-63	1218320

CAUTION „ When using G-64, it is recommended to use a flux dispenser (1049533) together.

Bushing, 5 left

Bushing, 5 right

<Lubrication Point>

Inside surface of "Bushing, 5" (Roller EJ Assy.)

<Lubrication Type>

G-26

<Lubrication Amount>

Adequate dose

<Remarks>

Use a cotton-tipped swab to apply it

MAINTENANCE Overview 95