Installation methods
The following methods are available to install the APD. |
|
• Standard Installation | page 21 |
This is a standard method to install the APD.
Use this method also when you connect the Customer Display with the stand‐alone connection. For the APD of version 4.07 or later, the printer drivers for both 32 bit and 64 bit version OS are installed.
• Installation when connecting Customer Display to TM printer page 32
When you make pass‐through or Y‐connection (page 12) to use one port for your TM printer and Customer Display, their drivers should be installed in the specified order.
• Plug and Playpage 42
TM printer with USB interface can be added as a printer device on a computer on which the APD is already installed (standard or custom install).
• Custom installationpage 44
This allows you to select specific functions and port drivers to install the APD.
For the APD of version 4.07 or later, you can select the 32 bit printer driver or 64 bit printer driver according to your OS environment.
• Installation for sharing the printer | page 49 |
This method installs a printer to be shared (Point & Print). |
|
• Upgrade installation of the APD | page 61 |
This allows you to perform upgrade installation of the APD of new version. | |
• Silent installation | page 63 |
This allows you to copy the APD environment to other computers. |
|
20